New box - pics

[drzenitram 10+ year member]

So I was told to build a box with 3 2.75" x 2.75" x 20"(deep) ports...

I ended up making one wiiide deep one. Sexy, right? I think so.

Here she is, in all of her hot and unsandedness and unholiness.

When I get the sub I'll cut the 13.98" hole with a jig and paint it black.

;-D

Soliddddddd. And... my port is going to work beautifully, thanks.

ahah ;-P

Click to read more...

 

[Moe Lester 10+ year member]

that port is WAY too skinny //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif nor does it look like its enough port area for that box.

 

[iceman1110 10+ year member]

What did I tell you

 

[chinny 5,000+ posts]

whoa tiny port

 

[Ray21 10+ year member]

Holy port noise Batman!

So I was told to build a box with 3 2.75" x 2.75" x 20"(deep) ports...

Who the hell told you to do that?

 

[flakko 5,000+ posts]

i know the ports like wat 1" wide? you will get MUCHO MUCHO port noise.

 

[AVSTANG02]

hahaha.

 

[iceman1110 10+ year member]

He wanted me to ask what port noise is?

 

[tRiGgEr 5,000+ posts]

For a box that size, I would gather a lot more port area will be needed. What sub is going in? Also having a port with a larger ratio of 1:8 is a bad Idea. There will be increased port noise about 90% of the time.

From my experience, you're going to need to do it over.

 

[drzenitram 10+ year member]

Okay, seriously, what is port noise?

And I'm putting a 15" RL-p in it on 850 watts.

My cousin and I did this in about 30 minutes. I'm sure we could remove the front piece and cut an extra inch to make the port wider if need be.

 

[fatryan 5,000+ posts]

im confused as to y you build a ported enclosure without knowing anything about port tuning...

 

[Sn0rKy 10+ year member]

with glue...

its goin to be a *****

 

[tRiGgEr 5,000+ posts]

Okay, seriously, what is port noise?

Are you serious? Noise that comes from the port...

When you have a lot of air being pushed threw a small space, turbulence is created and you will get a rushing flop/whistle sound. Basically it sounds like chit.

And the port is way to small for an RL-p 15"

You need at least 35 square inches of port area in a 1:8 ratio or smaller.

Also what is it tuned to?

 

[AVSTANG02]

I love how proud everyone gets and then..

BLAMMO! SHOT DOWN!

 

[DBfan187 5,000+ posts]

your sealed box with a hotdog shaped hole in it looks nice.