Needing ported box design

[Chad21000]

Hey guys I need a ported box design for a nvx vcw 12 it's going in a 1996 mustang gt without the Mach system. Any help would be appreciated. I do believe I have around 14 inches of height available. But the problem with the box is getting it through the opening in trunk/back seat. Would it be easier if built in the trunk?

Click to read more...

 

[The_Dealer]

Max dimensions?

Sent from my SM-G925T using Tapatalk

 

[Chad21000]

Depth really isn't a matter.height is. I believe max height can be 13 inches

 

[Chad21000]

The size of trunk isn't the problem it's just getting the box into the opening

 

[Chad21000]

Bump bump?

 

[CSCStang]

Hey guys I need a ported box design for a nvx vcw 12 it's going in a 1996 mustang gt without the Mach system. Any help would be appreciated. I do believe I have around 14 inches of height available. But the problem with the box is getting it through the opening in trunk/back seat. Would it be easier if built in the trunk?

I've done a few enclosures for these older Mustangs. The only way you're going to fit a 12 in is through the back seat with a sub up box with roughly 10" box height.

Sent from my SCH-I605 using Tapatalk

 

[The_Dealer]

I've done a few enclosures for these older Mustangs. The only way you're going to fit a 12 in is through the back seat with a sub up box with roughly 10" box height.
Sent from my SCH-I605 using Tapatalk

I haven't had very good luck doing sub firing up in sn95's. I built a rear firing box for an Ab HD 12" to fit my buddy's 96 gt. Was a tight fit but it went in through the trunk, like taking the trunk weatherstripping off to get it in kind of tight.

OP, I may still have the design but if not I'll see if I can swing by my buddy's so I can measure it.

Sent from my SM-G920T using Tapatalk

 

[CSCStang]

I haven't had very good luck doing sub firing up in sn95's. I built a rear firing box for an Ab HD 12" to fit my buddy's 96 gt. Was a tight fit but it went in through the trunk, like taking the trunk weatherstripping off to get it in kind of tight.
OP, I may still have the design but if not I'll see if I can swing by my buddy's so I can measure it.

Sent from my SM-G920T using Tapatalk

Definitely not ideal in a trunk build but when they already have the sub you gotta make do.

Sent from my SCH-I605 using Tapatalk

 

[Jeffdachef 5,000+ posts]

mustang trunks are horrible for daily SPL. Gotta cut and mod soo much if you want to fit real cone area.

 

[The Camry]

Thats why you should always wall a mustang

Sent from my SGH-T999 using Tapatalk

 

[The_Dealer]

Thats why you should always wall a mustang
Sent from my SGH-T999 using Tapatalk

Or throw a pair of x8's in there and mod to make it fast

Sent from my SM-G920T using Tapatalk