Need someone smarter than me

[JCANTONE 10+ year member]

well if you want to feed your subs like 50 watts each then sure go for it

 

[Scoobydoo 5,000+ posts]

probably, but why not just ditch the rears all together

4 12" subs off 400 watts total is really low as well

 

[97srad750 10+ year member]

probably, but why not just ditch the rears all together
4 12" subs off 400 watts total is really low as well

Well everyone tells me the sub channel is closer to 500 watts, and the RMS on the subs is only 150 watts so it's not far off what's required. For the couple seconds it plays, it slams pretty hard.

 

[Scoobydoo 5,000+ posts]

Well everyone tells me the sub channel is closer to 500 watts, and the RMS on the subs is only 150 watts so it's not far off what's required. For the couple seconds it plays, it slams pretty hard.

lol

get rid of everything but the components and 2 12" subs, it will sound much better

200 per sub will be much better as long as you set your gains properly

100 per sub isnt nearly enough, especially if you are running a gazillion speakers off the amp

IMO

 

[97srad750 10+ year member]

lol
get rid of everything but the components and 2 12" subs, it will sound much better

200 per sub will be much better as long as you set your gains properly

100 per sub isnt nearly enough, especially if you are running a gazillion speakers off the amp

IMO

Alright I'll try that. Thanks for your help. I just assumed since the MMATS amp I took out was 2 ohm stable, then it would hurt to just use those wires. That MMATS must be underrated severely.

 

[iamamp3pimp 5,000+ posts]

take it to a shop

 

[97srad750 10+ year member]

take it to a shop

Yeah I think that's where I'm at.