Need some suggestions for speakers for my Syclone :)

[smgreen20 10+ year member]

Get the Q-forms and put the 6 in that. Put some fiberglass on the back of the Q-form to strengthen it up. Fab a plate for the dash 4x6 location to house the 4" and the 2", it'll be a tight fit, but possible to do. An easier way would be to put the 4" in the 4x6 local and put the tweet on top of the 4x6 speaker grille if it has the angle mount.

 

[smgreen20 10+ year member]

Is this what you have?

Boston Acoustics PRO6.53 (pro653) ProSeries6.53 6-1/2" + 4" 3-way

 

[MJL 10+ year member]

I can't even quote the link. Yep, that's what I have. Can't for the life of me understand why I'm being told to leave the 4" in the closet... Sorry if I'm missing something obvious here.

As for the tweeter, it has a spot in the Q forms. Is that not a good place for it?

 

[smgreen20 10+ year member]

It's a good place, if you "left the 4" in the closet". He's just trying to save you space and suggesting you run it as a 2-way set up. I'd just stick with the 3 way. I wouldn't put the tweet down low as you'll have lows/highs coming from down low and the mids coming from up high. It would not be the best sounding solution. Keeping the mid range and tweet together is key, the mid bass can be separated from the rest with good results.

 

[MJL 10+ year member]

It's a good place, if you "left the 4" in the closet". He's just trying to save you space and suggesting you run it as a 2-way set up. I'd just stick with the 3 way. I wouldn't put the tweet down low as you'll have lows/highs coming from down low and the mids coming from up high. It would not be the best sounding solution. Keeping the mid range and tweet together is key, the mid bass can be separated from the rest with good results.

NOW I understand //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif That's what I was looking for. Thanks!