Need some help with a design

[bwe45 10+ year member]

So im trying to come up with a design for my little AQ SDC 2.5 8" built by Resko. So far Im absolutely stuck with how to go with the design. I wanna tune it to about 38hz and keep it in the range of .5 to .75 cubes as per what Resko suggested for it. And at this point im just straight stuck

Click to read more...

 

[psych0ticnemes1 5,000+ posts]

Hmm... stuck on what exactly? Round or Square port?

On a side note, where in NY are you?

 

[bwe45 10+ year member]

That and just overall sizing of each side of the box as well Im new to doing designs

Im from upstate, in the saratoga area

 

[pro-rabbit 5,000+ posts]

Well, let us know what car/truck this is going in. The area you have to work with and also the amp(maybe a flushed install is possible)

 

[bwe45 10+ year member]

Working with a Phoenix Gold Octane R 15.0:1 in a 2001 Honda Civic LX, looking to try to keep the box smaller than 15" tall max, 33" Wide max, and the depth to me isnt an issue, im figuring we wont have something too deep here

 

[RAM_Designs 5,000+ posts]

.75ft^3 at 35hz will work well. Tuning any lower will probably result in too much of a drop in efficiency...box won't have to be that big at all.