Need plans for four L7s

[Raisedin305 5,000+ posts]

Just ordered another two so it's going to be four 15" L7s in total.//content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif I need two box plans made. One for SPL another for daily driving. I want each sub to have their own chamber.

Daily driving box- must have their own chambers, tunning around 30hz-33hz, was going to go with aeroports but if you prefer square thats fine.

SPL box- Aeroports (no crazy sizes), it can be a wall, this box would be just for SPL and in the local shows here they don't care how big your box is.

Hit me up on aim- Raisedin305 or post here if you can make me some plans. You must have some refs with good feedback. Only people I know that are known for plans are Mikescanlon, Saywhat, Moe Lester, and I think DBFAN (may be confused with some one else).

Click to read more...

 

[Raisedin305 5,000+ posts]

BTW I want it also to be CRX style.

Space to work with-

48"H

46"D

16"H

 

[Raisedin305 5,000+ posts]

Ttt

 

[Raisedin305 5,000+ posts]

Anybody??

 

[mobeious 10+ year member]

i would help ya man but u don't have enough space for 4 L7 15's u need bout 4 cubes per sub so 16 cube plus port u have 15 cubes total

 

[Raisedin305 5,000+ posts]

i would help ya man but u don't have enough space for 4 L7 15's u need bout 4 cubes per sub so 16 cube plus port u have 15 cubes total

Thought I had 20cubic ft??????????/

 

[mobeious 10+ year member]

i might be able to do something if i do the exact dimmentions u gave me... that leaves no room for give though dimmensions u gave me equal 17.3cubes

 

[Raisedin305 5,000+ posts]

i might be able to do something if i do the exact dimmentions u gave me... that leaves no room for give though dimmensions u gave me equal 17.3cubes

Are you sure?

This what I did...

48" x 46" x 16"= 35,328 divided by 1728 = 20.44444444444

I don't know if that is correct though.

 

[PhatTonyDeMarco 5,000+ posts]

Are you sure?
This what I did...

48" x 46" x 16"= 35,328 divided by 1728 = 20.44444444444

I don't know if that is correct though.

Subtract 1.5" from each dimension to factor in wood displacement.

 

[Jester1318 10+ year member]

You may not have any room for any kind of bracing, which that box seems like it would need

 

[mobeious 10+ year member]

u are doin outside dimmensions u have to calculate inside dimmensions

46.5x44.5x14.5 = 30004.125 = 17.36

 

[PhatTonyDeMarco 5,000+ posts]

And how do you plan on having each driver in its own chamber, and still share a common port?

 

[Raisedin305 5,000+ posts]

And how do you plan on having each driver in its own chamber, and still share a common port?

Don't know if it's possible but I was looking at Steave Meades setup. He has four 18" MTs CRX style.

 

[Raisedin305 5,000+ posts]

u are doin outside dimmensions u have to calculate inside dimmensions
46.5x44.5x14.5 = 30004.125 = 17.36

True, your right.

 

[PhatTonyDeMarco 5,000+ posts]

And you say the SPL box can be a wall... But you would take it out after comps? In case you didnt know, a wall is built IN TO the vehicle, meaning it wont just slide out for a daily vehicle...

Do some research before you talk out of your ***...