Need Kicker Box Plan. Gmail Invite For you!

i always thought that they would cancel each other out if they were all in the same chamber. Thanks everyone. If you want a gmail invite pm your email.

 
grrr. I cant find 1inch MDF anywhere so i gotta use 3/4.

Can someone verify my own calculations below please.

Dimensions:

32.5 inch Width

15.5 inch Height

20 inch Depth

External Vol. = 5.83 cuft

Internal dimenstions with 3/4 MDF:4.646 cuft

Internal dimensions after subtracting speak displacment: 4.494

Tuned to 31 HZ

Vent Length: 19.36 inches

Vent Height: 14 inches

Vent Width: 3 inches

Please tell me this is right : (

 
ok just because i started it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

ALL THIS IS INTERNAL MEASURE for 3/4 MDF

Vb = 4.7

H= 14.18"

W=34.7"

D=22.02"

port frequency 31hz

port hight 14.18"

port width 2"

porth lenght 14.45"

 
ok just because i started it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gifALL THIS IS INTERNAL MEASURE for 3/4 MDF

Vb = 4.7

H= 14.18"

W=34.7"

D=22.02"

port frequency 31hz

port hight 14.18"

port width 2"

porth lenght 14.45"
ok i recalculated and these numbers are right but they are EXTERNAL NOT internal

just to make a point do you see how much differance the internal and external measurments make---1/2ft^3 and about 5Hz.

 
sigh. Sorry to be a nuscence, but the port length seems short to me. When do i curve the port? I thougth it was suposed to be 2 inch all around but its too short.

Edit: Was the increase in width neccesary? I was really aiming for 32.5 inches.

 
Finallly Finished, except carpeting. Thanks everyone for their help.

Here are some Pics:

DSC00018.jpg


DSC00015.jpg


DSC00022.jpg


 
looks real good. . .where did you get the plan? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

how does it sound?

ps you should of painted the port black, you'd gain about 3-4 db IIRC. //content.invisioncic.com/y282845/emoticons/veryexcited.gif.c26a15f316d23068607f36ddacd7a7ab.gif

also how big is the wire running to your subs. . . it looks pretty small.

 
yea the wire i used are small. I intend to use thicker gauge wires. Also i didnt know that a painted port would get some more db... THanks for the TIp!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

stevieB

10+ year member
Junior Member
Thread starter
stevieB
Joined
Location
florida
Start date
Participants
Who Replied
Replies
24
Views
1,563
Last reply date
Last reply from
stevieB
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top