Need Kicker Box Plan. Gmail Invite For you!

[stevieB 10+ year member]

Hi. I need some help with my Dual Kicker 12' L5 Vented box.

My max dimensions are

32.5 inch Width

15.5 inch Height

15- 20 inch Depth

Just a standard rectangle box is fine. Something like what my pic looks like.I really dont know too much about tuning, so whatever you think is the best. Maybe 36 frq??

I have up to 6 gmail invites for helping me. Leave you email after your plans.

Thanks.

Click to read more...

 

[sumone 10+ year member]

this should help you out....

 

[avistar23 10+ year member]

Do you have the t/s paramaters of the sub handy ?

-Mike

OK i found t/s paramaters.

 

[stevieB 10+ year member]

crap forgot to mention 4 ohm.

here are the t/s

http://www.kicker.com/ShowPage.cfm?filename=TS_SolobaricL5_4Ohm.html&menu=SUBWOOFERS

 

[BASS OUTLAW 10+ year member]

how much cuft? and what tunning freq u want?

 

[stevieB 10+ year member]

I want the Freq to be 32hz. As for Cubic Feet, whatever the max number of this can get me.

32.5 inch Width

15.5 inch Height

15- 20 inch Depth

 

[BASS OUTLAW 10+ year member]

I want the Freq to be 32hz. As for Cubic Feet, whatever the max number of this can get me.
32.5 inch Width

15.5 inch Height

15- 20 inch Depth

okwith your maximum dimenstions without port displacement)

external vol. =5.83 cuft

internal dimenstions :

using 1" MDF =4.289 cuft

using 3/4" MDF = 4.646 cuft.

___________________________________________________

with 1" MDF (all dimentions are INTERNAL MEASUREMENTS) //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

DIMENSTIONS

HIGHT = 15.5"

WIDTH =325"

Depth= 20"

gross box vol = 4.123 cuft

net box vol = 3.418cuft

PORT LENGHT = 27.981inches

Port AREA = 43.592 inches

PORT VOL. = 0.705 cuft

 

[BASS OUTLAW 10+ year member]

what else did i forget ???

 

[stevieB 10+ year member]

sounds good. My power has been cut off for a week becuase of francse so i couldnt get online. I will send you ur invite asap. Thanks for the plans

Edti: I wanna use your 3/4 plans so i can get a little more space. Also can you tell me how long the port should be until it bends? A crappy diagram would help a little.

 

[BASS OUTLAW 10+ year member]

no problem //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[BASS OUTLAW 10+ year member]

well here it is //content.invisioncic.com/y282845/emoticons/driving.gif.c4dead4599dda895032b63e51f52b126.gif

 

[stevieB 10+ year member]

nice. But i needed a box for 2 seperate chambers. Thanks for the work though. PM your email address to me so i can send you a invite if you want one.

 

[jellyfish420 10+ year member]

why do you need 2 seperate chambers? by doing that you will cut down you box volume down because you will need a divider and a second port. i would just use the common chamber box.

 

[stevieB 10+ year member]

i want one like the picture i posted. Do you think the one bass outlaw provided will do better then the one i proposed?

 

[LuNaTiC 10+ year member]

as long as the 2 subs are getting the same signal his will be better than your original idea. with the seperated chambers u would need 2 ports instead of 1 and a divider, so his way will give u a lil more airspace.