Need Help!!!!!

[bigfun101 10+ year member]

OK from the last post I have channed my setup and this is what I am thinking of buying now.... and always your input is wanted good or bad....

Hifonics BXI1206DE 1 ohm: 1200 watts x 1 channel

2x 10in Crunch GP10D2 Sealed Box Dims: 0.50 RMS Power: 500W

Hifonics TXI4006 RMS Power (4 ohms): 100 watts x 2 chan

Hifonics ZXI6.5C Size: 6.5" RMS 100W

Ok this is what I am thinking about running and their specs any input???? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[kross 10+ year member]

Those subs are dual 2-ohm, you need dual 4-ohm. JBL GTO 1004D is a great sub for the money.

I don't know anything about those Hifonics speakers, but I do know, that for just a tiny bit more, you can get a set of Phoenix Gold RSd65cs comps on ebay, for less than $90 shipped. Those are great speakers for the money.

 

[bigfun101 10+ year member]

ok so my subs have to be 4 ohms???

back to the drawing board //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

but how does the rest look??

 

[bigfun101 10+ year member]

OK HOW ABOUT THIS SETUP????

Hifonics BXI1206DE 1 ohm: 1200 watts x 1 channel

2x 10in Crunch GP10D4 Sealed Box Dims: 0.50 RMS Power: 500W

Hifonics TXI4006 RMS Power (4 ohms): 100 watts x 2 chan

Hifonics ZXI6.5C Size: 6.5" RMS 100W

again thanks for everyones help trying to get this nailed down so I can get this installed this weekend!!!

 

[kross 10+ year member]

If you really want that sub, they make a 4-ohm version. But you can find better quality for the money.

Hifonics amps are fine. You might want to bump up the 4006 to the 6006, to give yourself a little more power. Most component speakers will be better served with 150w instead of 100w.

As I said above, I have no idea how the Hifonics component speakers sound. But I do know the PG comps sound great. The PG comps will handle 150w per channel perfectly fine, too.