Need Help with POWER WIRE question!!

[Korn4Life 5,000+ posts]

Right now I have one run of 1/0 going to my back seat. I upgraded my amp to a IA 40.1. This amp has two Power wire inputs and two ground inputs. So my question is will I be all right with one run of 1/0 from the front going to two stinger batteries then coming out from the batteries with two Power wires. OR do I have to make another run from the front to the batteries? Any help is greatly appreciated.

Click to read more...

 

[Korn4Life 5,000+ posts]

ttyhg

 

[Korn4Life 5,000+ posts]

ttt

 

[Korn4Life 5,000+ posts]

I have wasted an hour now waiting for some help. Come on people

 

[etznova 10+ year member]

you will be fine with a single run front to back then switchin to two at the rear batts that is what i am doing with my Z1. However you might want to run ground from the front to the back also

 

[Korn4Life 5,000+ posts]

THANK YOU VERY MUCH. Etznova FTW

 

[tRidiot 10+ year member]

The extra set of terminals is just a duplicate, to hook up double wiring, or a capacitor.

Using one set is 1000% ok.

 

[Korn4Life 5,000+ posts]

Are you being serious?

 

[ultimate157 5,000+ posts]

If its 2x 4 awg inputs, you need both.

I would run a dedicated 1/0 ground for that amp.