need help with digital designs recone

[sundownz Pro Seller]

Yep, I just use a grinder with a wire brush to get the majority of the surround / spider material off then finish off with a sanding disc to get the remaining glue off. Works great //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[NDMstang65 10+ year member]

40 grit flapper disc on a 4" grinder...

 

[sundownz Pro Seller]

40 grit flapper disc on a 4" grinder...

I need to try those still //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Lil Poot 5,000+ posts]

from dd, 108+shipping for an 18" recone, not counting the basket. another 345 if you want the composite cone.

i used acetone to finish cleaning it up after i used the paint stripping gel to get the thick shit off.