First off let me say sorry I am new to the forum and new to DVC subs so I am having a few issues. I have looked every where thru this forum and other forums trying to find previous threads for these subs and there isn't a whole lot of info on them. So I bought these used off a guy they are 2 12 in alpine type x. Which are 4 ohm DVC. The way the guy has it wired right now is 4 ohm in series I believe. I was told I can go to 1 ohm in parallel. My problem is these subs have clips in them. 3 slots on each sub. The middle slot says series and the outer 2 slots don't say what they are. There is a clip in both subs In the middle slot. So I am assuming I need to remove this clip and use the outer 2 slots on both subs to make them parallel. But I don't have but 1 clip per sub so I can't use both outer slots for both subs. So I am trying to see if anyone has ever had these subs and know for a fact if I am supposed to use the outer slots for parallel and if I am where can I buy more clips or wire it in parallel with out the clips. Thanks.
