need help wireing the 2 12' Subs

[jamezruiz 10+ year member]

i got 2 12' inch Premier subs 1200 watts each and 400 RMS each 4OHM dvc

here is the specifications of the Kenwood KAC-9103D :

1800W Mono Subwoofer Amplifier

RMS Power Range : 500-900 Watts

Number Of Channels: 1

Maximum Power: 1800 Watts

Low Frequency response: 20 Hz

High Frequency Response: 20000 Hz

Built In Crossovers: Yes

Channel Separation: Yes

Features

RMS Power @ 4 ohms: 500 Watts x 1

RMS Power @ 2 ohms: 900 Watts x 1

CEA-2006 compliant

Top-Mounted controls

Preamp Outputs - 1 Pair

Power MOSFET Switching Power Supply

Variable Low-Pass Filter: 50 - 200 Hz

Infrasonic Filter: Off / 15 / 25 Hz

High- and Low- Level Input

Adjustable Input Sensitivity: 0.2 - 5V

Bass Boost Control: 0 - 18 dB

Class D Amplifier Circuit

RCA Inputs/Outputs

Fuse Rating: 30A x 2

Signal-to-Noise Ratio: 94 db

Dimensions: 11-1/4" L x 14-15/16" W x 2-9/16" H

whats the recomended wireing?

Click to read more...

 

[p3bumpin 10+ year member]

wire to a 4 ohm load because that the best the amp can handle with 2 DVC 4 ohms. 1 ohm will blow your amp.

 

[99grandprixGT 5,000+ posts]

ya your going to wire to 4 ohm. if you did not get the subs yet get dual 2s.

 

[jamezruiz 10+ year member]

i have them and purchased them in 4ohm mode lol not a wise choice. well they are currently wired to 2ohms each and arranged in series to a cheapo amp. will that still work fine?

 

[jamezruiz 10+ year member]

i'm just trying to see if i can indeed try and get the rated 2ohm 900RMS instead of the 500 RMS stated for 4OHM subs

 

[PsychoTheRapist 5,000+ posts]

Pioneer makes a 12' sub? //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[jamezruiz 10+ year member]

Pioneer makes a 12' sub? //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

yes they make 12 inch subs, Pioneer Premier TS-W1207D4

12" 1200W Dual 4-Ohm Subwoofer

 

[jamezruiz 10+ year member]

okay so can any one tell me if i am able to wire two 4ohm subs to get a 1ohm load and 2 ohm load an a mono block?? and how would i do it

looking to buy this Kenwood KAC-9104D

Class D Monoblock Car Amplifier

RMS Power Rating:

4 ohms: 500 watts x 1 chan.

2 ohms: 900 watts x 1 chan.

1 ohm: >900 watts x 1 chan.

Max power output: 1800 watts x 1 chan.

MOSFET power supply

LED power indicator

Tuned Bass EQ (0-18 dB bass boost at 40 Hz)

Stackable operation capable

Phase inverter (0°,180°)

Speaker-level inputs with signal sensing for automatic turn-on)

Preamp RCA outputs

Short circuit, DC offset, overload, and thermal protection circuitry

Aluminum die cast heat sink

Built-in cooling fan

Gold-plated RCA level inputs

Gold-plated screw terminals

Variable low-pass filter (50-200 Hz, 24 dB/octave)

CEA-2006 compliant amplifier

Frequency response: 5-200 Hz

Dimensions: 13-3/4"L x 2-5/16"H x 9-3/8"D

8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.