Need help setting up 4 channel amp please.

[hornedfrog1985 5,000+ posts]

I have an MB Quart DSC4125 amp, and I'm trying to run it bridged to my comps. I can do this right? I don't see anything like that mentioned in the manual http://www.maxxsonics.net/manuals/mb...fierManual.pdf

My main questions are:

1. Where would I run the RCAs, like which inputs.

2. Would I leave it switched on 4 channel operation, or switch it to two?

Click to read more...

 

[subzero 5,000+ posts]

If it has a option to go from 4 chn or 2 chn, leave it on two chan.

Your link is fail...

 

[hornedfrog1985 5,000+ posts]

http://www.maxxsonics.net/manuals/mbquart/pdfs/MBQuart08DiscusAmplifierManual.pdf

So switch to 2 channel, and then just run to channel 1/2, and bridge the amp?

 

[tigerf117 10+ year member]

Keep it on 2ch, bridge the speakers to each set, run from output to input or both sets of RCAs. IIRC some amps only need one set of inputs and it'll still power all 4 ch, not sure when you are bridging 2ch each to make a 2ch amp. Also the xover if you use it on the amp usually only needs to be run on one set and it'll cross over the other side as well.