Need help quick! Memphis mojo 2500 vs kx2500.1

[Williams37 10+ year member]

I can buy either of the amps, and would like to have one bought by tonight, The kx is cheaper than the Mojo, but which would you guys prefer, and why? Thanks a lot.

Click to read more...

 

[treadburner 10+ year member]

both are underated

id say go with the cheaper one as they r with in 50 watts of each other

 

[ThatChevyGuy 5,000+ posts]

Personally the mojo. I've seen the kx line give local competitors nothing but problems.

 

[Williams37 10+ year member]

I should add that if I buy the kx, I'll have to buy a dual 4 ohm SPAIR for my solo x to run at 2 ohms. Sound like the memphis will be the way to go?

 

[99grandprixGT 5,000+ posts]

ya if you wantin the 1ohm then ya fo for the memphis.

 

[ThatChevyGuy 5,000+ posts]

ya go for the memphis then.

 

[CobraStang98 10+ year member]

Memphis

 

[mossberg385t 10+ year member]

memphis

 

[gunz4me 10+ year member]

Unless Memphis has updated their POS design that leaves the circuit board mostly supported by the MOSFETS, I say go with the kx2500.1! Then again, I haven't used a POS Memphis Car Audio amp since 2007, so the lack of circuit board support may be fixed by now.

 

[NightDrifter05 10+ year member]

Never had any issues with any of the many memphis amp's I have owned but since you need 1ohm and I don't know if you want to risk running the 2500.1 at 1ohm then the memphis is the best option.

 

[BassAddictJ 5,000+ posts]

hows your electrical? the kx is going to be more efficent. the mojo will go lower for burps. ive used a few kx 2500.1's and sometimes they play 1 ohm nominal, sometimes they dont and cut out on heavy bass notes. both are great amps, as much as i love kicker 2500's you're probably better off with the mojo.