Need help!Polecat...and others

[KnOkIn It 420 10+ year member]

I am using the WinISD box program and they dont have the specs of the 12" L5,so I know I can enter my own specs to get it to work,but they specs I have(owners manual) are based on 4 ohm models ,how can I get the 2 ohm specs?Or does it even matter?Thanks for any help u guys can offer me.

Click to read more...

 

[GSteg 10+ year member]

polecat will chime in about....

34 minutes

Why not just use kicker's spec? WinISD isn't too helpful (if you're looking at the transfer magnitude graph) unless you plan to use your box in a wide open parking lot.

 

[jalverson 10+ year member]

www.kicker.com

go to the support tab and then technical support or manuals

 

[jalverson 10+ year member]

i'll even go one further her is a link to the pdf manual

http://www.kicker.com/06/tech-support/manuals/manuals/2005/2005%20Solo-Baric%20L5%20Sub%20manual.pdf

 

[KnOkIn It 420 10+ year member]

i'll even go one further her is a link to the pdf manualhttp://www.kicker.com/06/tech-support/manuals/manuals/2005/2005%20Solo-Baric%20L5%20Sub%20manual.pdf

That is the spec that have those are based on the dua 4 ohm vc,I have dual 2 ohm vc,thats the proplem,But I dont think it will matter if I use the spec for the 4 ohm for a 2 ohm box design,I just wanted to make sure and if I can where can I find the specs I need

 

[KnOkIn It 420 10+ year member]

[quote=

Why not just use kicker's spec? WinISD isn't too helpful (if you're looking at the transfer magnitude graph) unless you plan to use your box in a wide open parking lot.

What cha mean by that?

 

[Polecat 5,000+ posts]

the numbers for 4 and 2 ohm are on the website, like jalverson quoted...they're on there //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Raisedin305 5,000+ posts]

Polecat, check your emails please.

 

[Polecat 5,000+ posts]

just did, 15 hour day, going home //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif