I know this is a question is often asked and I am aware of the majority of differences between sealed and ported boxes. What I am looking for is the flattest response possible, with emphasis on (20-50hz) if any.
Current setup:
Stock electrical running =
MTX Thunder 7801 (RMS 1825Wx1 @ 1ohm (obviosuly not putting out the factory tested since I have stock electrical, a single run of 4gauge, and a 60amp under the hood)
Powering: 2 x Pioneer TS-W1207D4 (12" Dual 4 Ohm Voicecoil)
Revc : dual 3.0
Levc : 3.55 (8ohm)
1.04 (2ohm)
Fs : 34.8 (hz)
Qms : 13.99
Qes : 0.54
Qts : 0.52
Vas : 1.44 (ft^3)
Rms : 2.561 (N.S/m)
Mms : 164.05 (g)
Cms : 1.3 x 10^-4 (M/N)
Diam : 9.5"
BL : 20.54 (8ohm)
10.27 (2ohm) (T.M)
Xmax : 0.37 inch
9.4mm
Straight out the manual...
Now to restate: Box... Sealed/ported dimensions?????
This is in a 99 Dodge Dakota Sport.... may move to the trunk of a 2/4door sedan in the future (if it makes a difference, what)
