Need help...BIG task...2005 std cab box design for 2 DD T1510's

[da box king 10+ year member]

3 cubes at 38 hz with port to passenger side....DONE

how bout move the port to driver side....there is more seat room over there, and that will allow for the excursion on the subs

 

[cj407]

well just so you know better numbers would be on passenger side...but if you want port on drivers side ok...

 

[da box king 10+ year member]

well just so you know better numbers would be on passenger side...but if you want port on drivers side ok...

yes true...I know that, just dont want him smashin his seat into the subs when he sits his tall *** down...the seat move about 1" when sat in

 

[dbeez 5,000+ posts]

did you try MIKE$^% he designs and build boxes and seems to be pretty good..

 

[davidt487 10+ year member]

i think your going to have to go with 8's dd rec box is 3cu ft 48 sqin of port tuned 35-40hz you will need 4 cu ft total to get that

 

[da box king 10+ year member]

i think your going to have to go with 8's dd rec box is 3cu ft 48 sqin of port tuned 35-40hz you will need 4 cu ft total to get that

he already got the tens, being shipped as we speak

keep them coming, and who is mike?

 

[davidt487 10+ year member]

the only way to fit them properly is to take out the middle seat and have the the port come out the center. ive seen it in a 2003 chevy and it worked out nice but it would take a lot of work.

 

[da box king 10+ year member]

the only way to fit them properly is to take out the middle seat and have the the port come out the center. ive seen it in a 2003 chevy and it worked out nice but it would take a lot of work.

yeah was thinkin bout that....I think it can still possbily be done...

if the box was 2.5 cubes, which is still ok, then it will be able to take more powaaa

keep em comin,

who on here designs boxes, or can take the challenge

 

[davidt487 10+ year member]

2.5 tuned to 38 is possible 3 isnt wont be practical

14.5"X55"X8"X11" 3X4" 25.75"

 

[davidt487 10+ year member]

btw that box will fit but its very very tight

 

[da box king 10+ year member]

2.5 tuned to 38 is possible 3 isnt wont be practical14.5"X55"X8"X11" 3X4" 25.75"

yours is 11 wide at the bottem? and 8 at top?

what do the dimensions mean....thanks man

 

[davidt487 10+ year member]

yea thats it the same box i have in my truck

 

[da box king 10+ year member]

btw that box will fit but its very very tight

how tall are you?

can you measure how far your bottom of the back of your seat is from the back of the truck?

I'm tryin to see if his seat is in the same position

 

[da box king 10+ year member]

yea thats it the same box i have in my truck

so you must have took that back piece off too, so you have no lip in the back of the box?

 

[davidt487 10+ year member]

im like 5' 10" so i dont think he will like it because i dont. plus you dont have much room to mount amps batteries ect. im thinking about going to one 10 or 2 eights just for a little room