need enclosure designer

[kingkung 10+ year member]

I am getting a JL audio 10" W6 V2 DVC sub and i am going to power it with a RF P400.2 punch series amp. Should i go with a 4 ohm or 2 ohm sub? I was also wondering if there is anyone out there that can make an enclosure specific to the needs of a 10" JL audio W6 DVC?

Click to read more...

 

[IamDeMan 5,000+ posts]

many here can make a nice enclosure for you. I would recomend fisher customs.

 

[jellyfish420 10+ year member]

dont' the dub 6's only come dual 3? i could be wrong. i would suggest building your own box, save lots of money, and you will have done it your self if you need a design pm me.

 

[kingkung 10+ year member]

the W7 are Dual 3. the W6 come 2 or 4 ohm DVC

 

[bjfish11 5,000+ posts]

Thanks Rob.

Yes, I would be willing to build the box for you. Let me know if you have any questions.

 

[kingkung 10+ year member]

PM sent bjfish11

 

[amedeuce 10+ year member]

the W7 are Dual 3. the W6 come 2 or 4 ohm DVC

I think you may be wrong on the coil configs

8w7, 10w7, 12w7 are single 3

13w7 dual 1.5

All W6V2's are dual 4's

I could be wrong but that's all I could find at several sites including JL's website!!!

 

[kingkung 10+ year member]

you are right. i was wrong. i'm sorry, i should of did some research before posting, Noob mistake, sorry guys.

Oh, I finally made up my mind. I am going with the 10" w6v2 D4 sub, I drive a little honda civic coupe 04 and i think it will be plenty for me to start with. thanks for all the helpful feedback.