I need some blueprints for an enclosure built to these specs:
2 10" subs
The recommended enclosure specs for 1 of these subs is: 1.25 cu.ft. @ 28-33hz
Id like to make it into 2 seperate enclosures, and have each of them port through the top, with a round port. The idea is that im going to remove the rear speakers, and port through the openings. So the enclosures should be 15.5" tall by 18" wide (outside dimentions, not inside, (assuming im using 3/4" MDF)) and as deep as is needed to meet the cu.ft. Something like this (pardon my crude paint drawing)
The round ports will go through the old speaker openings in the rear parcel shelf.
Im willing to pay a couple of bucks for your troubles, if needed.
2 10" subs
The recommended enclosure specs for 1 of these subs is: 1.25 cu.ft. @ 28-33hz
Id like to make it into 2 seperate enclosures, and have each of them port through the top, with a round port. The idea is that im going to remove the rear speakers, and port through the openings. So the enclosures should be 15.5" tall by 18" wide (outside dimentions, not inside, (assuming im using 3/4" MDF)) and as deep as is needed to meet the cu.ft. Something like this (pardon my crude paint drawing)
The round ports will go through the old speaker openings in the rear parcel shelf.
Im willing to pay a couple of bucks for your troubles, if needed.
