Need box design + box built

[edavis.j 10+ year member]

I want a box that really meets the specs of the subs so I'm going to get the loudest and best SQ out of the sub possible.

I don't know what all information is needed so here we go.

Amp: MMats D1600.2 - 1150W RMS @ 2 ohms

Sub: Fi Audio Q12 - 1000W RMS @ 2 ohms

Sub specs:

Fs: 34.2Hz

Re: 0.7 ohms/coil

Qms: 7.63

Qes: .39

Qts: .37

Mms: 249g

Cms: 0.87mm/N

Sd: 481cm^2

Vas: 28.3

Spl: 86.5db 1W/1m

Bl: 13.9 N/A

Xmax: 28mm

Rms: 1000w

Ported box: 1.8-2.5cu ft, @ 28-33Hz, optimal 32Hz

Sub OD: 12.500"

Cut ID: 11.125"

Mounting depth: 7.000"

Displacement: 0.16cu ft

12-16 square inches of vent area per cubic foot of volume.

Excuse my horrible drawing skills in paint but this is the maximum size that the box could be to fit in the amount of space I have:

So who can help me out? Did I supply all the needed information?

Click to read more...

 

[bassman3 10+ year member]

Shoot me a PM and I can work something out for you.

 

[iamamp3pimp 5,000+ posts]

I can build you something for that, and it would only take me a day or so to get it all ready for shipping.

lmk if interested, id be more than happy to get this done for you.

-Robin

 

[outsideshot23 10+ year member]

sucks you live in PA.. good buolders arwe a dime a dozen on this site.. lots of good ones.. not alot of audio up in pa is there??? i thought it was mostly south/central states.. i may be wrong

 

[psych0ticnemes1 5,000+ posts]

I'm in southern NY. Let me know. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[BumpinKota 10+ year member]

I live by cleveland about 20 min south. Let me know i can help you out/show some pics of what i have done in the past //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif