Need a ported design for 4 JBL P1022s

[Zeptoplix 10+ year member]

Hey, I have a 90 Taurus, currently run the JBL 1022's in a sealed enclosure.

Would like to run them in a ported enclosure, tuned low, maybe around 30hz if possible.

The trunk opening is approximately 52"x20"

the space between the strut towers is about 37",

the distance between the trunk hinges is about 43"

from the back seat to the tail lights there is about 40" I can probably have a box about 18" tall in the trunk, if need be i could slide it in from the passenger compartment.

I was thinking subs facing up, port back towards the tail lights.

The subs stick out from the current box about 1.5" or so because of the frame of the subs. Anybody have an idea what I could do?

Thanks alot.

Click to read more...

 

[iamamp3pimp 5,000+ posts]

Are You Able To Build It Inside The Trunk?

 

[Zeptoplix 10+ year member]

It could be built inside the car, but i prefer to be able to remove it; the car is old and if something major goes i'd like to be able to remove everything quickly if its out of town or what not.