Need A Hand(Zapco)Q's

[troy_audi0 10+ year member]

Hey Everyone,

Ok here is my System

HU- Addzzest DRX9255 EXL twin 20bit Alpha Processor 9V

Comps- Kicker SS Custom Xovers

Subs- (2)ID10's Ported @28Hz

Amps- (2) Zapco Z200C2-SL's (50x2Front Stage 320x1Subs)

Now For my Q¿

My Zapco Z200 dose not have a Xover or Subsonic Filter

I will need this to power & Tune The Xover for the Subs Right¿

So what Parts Do You ThinkI should get?

Thanks Ahead of time

Peace Troy

Click to read more...

 

[JAZN 5,000+ posts]

Your 9255 should have the crossover you need for the sub IIRC (although I'm not completely sure), and at a tuning of 28hz I doubt you'll need a subsonic filter unless you plan to play sub-tuning tones all day.

 

[alphakenny1 10+ year member]

oh wow did you buy the addzest from that guy on eca? if so isn't that japanese version of the clarion drz9255? if so again it should have a crossover for the sub on the HU if you choose to use it. so cross the sub via HU since your amp doesn't have xovers.

 

[alphakenny1 10+ year member]

BTW: Thats a dam bomb system system you got there man!!

 

[troy_audi0 10+ year member]

Thanks Guys for the complAments..

I dont have any info on the HU

All I can Find on it sofar is:

Push/Pull Fade L/R - F/R

Push/Pull Treb./Bass

I got The HU from a Guy In Japan

I messed with the Clairion at a local shop it has more setting type stuff on it..

So Thats why I had to post I also was thinkin the HU would do it all..

Asfar as the subsonic filter gose..

This is my 1st ported box I dont know much about ported boxs

Thats why I went Aero Port I dont know how to do the math for the Slot/Squre ports

I was just thinkin I would need a Filter..

I do drive for long trips 8hrs or more so I will have the system loud for long drives..

So I just dont want to mess anything up..

Keep the thoughts comming

Peace Troy