Need a Design

This one will be a tight fit for the subs, but it should work. Its 4.4 cubes at 32.

44cubes32hz66sqin7et.png


 
^^^ what does this guy know //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

There is a sticky in the enclosure forum with a bunch of designs, maybe browse thoughs?

 
^^^ what does this guy know
There is a sticky in the enclosure forum with a bunch of designs, maybe browse thoughs?
I looked through all those, but it only goes up to 5 cubes. I need 5.46 cubes including displacement.

 
So now, you have 5.46 after displacement, to work with??
I didn't say that's all I have to work with. I said that's the volume I need according to Orion's specs, but I am working with pretty much unlimited space. The plans jntar posted are for 4.4 cubes without displacement taken into account (too small).

 
Uhh...Orions site calls for 2.25 cubes at 32 or 33 so I chose a slightly smaller box. Maybe I didnt read it close enough and it was 2.25 after displacement.

Yep...the sire says net so the plans I posted will be too small.

 
Uhh...Orions site calls for 2.25-2.5 cubes at 32 or 33 so I chose a slightly smaller box. Maybe I didnt read it close enough and it was 2.25 after displacement.
The 2.25 is w/o displacement taken into account. I have 2 15's, so 2.25 x 2 = 4.5, + .96 diplacement = 5.46 //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif .

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

OC*SS

10+ year member
Senior VIP Member
Thread starter
OC*SS
Joined
Location
SoCal
Start date
Participants
Who Replied
Replies
8
Views
527
Last reply date
Last reply from
OC*SS
1778578257023.png

Glen Rodgers

    May 12, 2026
  • 0
  • 0
Screenshot_20260511_212804_Amazon Shopping.jpg

Blackout67

    May 11, 2026
  • 0
  • 0

New threads

Top