need a box design for two 15" L7s in a SUV

[aaron7114 10+ year member]

bump for some help...

 

[king ranch 5,000+ posts]

contact mobeious

 

[aaron7114 10+ year member]

contact mobeious

I just sent him a message.

 

[aaron7114 10+ year member]

bump.

still needing help and suggestions...

 

[aaron7114 10+ year member]

Is it ok to have the port on the side instead of running across the bottom? Will there be much of a difference?

 

[solo1 10+ year member]

32x24x16 subs up slot port back with a good brace betwwen the subs, tuned too 34hz

 

[aaron7114 10+ year member]

ok I have a question. If I built this box:

http://www.subwoofertools.com/forum/ported-box.asp?Ew=39.5&Eh=21.25&Dia=10&Xmax=13.5&Vd=0.13&NumW=2&Vb=7&Fb=34&Qts=&Vas=&Fs=&CE=0

On the front of the box..beside the port I am going to mount both of my amps. Then I am going to build out around the amps with wood and then put plexi glass in front of the amps. That way all the wires are hidden and it should look pretty cool. So because of that the port will actually extend out around 3 extra inches. Will that raise or lower my tuning? by how much?

So I am taking out the violet board so that its a straight port instead of L shaped. And then also the port will extend out of the box around 3 inches. What do I need to do to get the tuning to 34 hz?

 

[aaron7114 10+ year member]

bump for some help. Planning on starting the build today