My "daily" setup PICS

[Lakota 5,000+ posts]

This is my daily setup. All of my equipment is listed in my sig. Please don't ***** and say it's ugly, because I really don't care. The ugliness is actually covered up pretty well when the seats are up. I did a 143.6 on the tl with this setup. Here you go, the pics:

The R's with the silicone to seal em a lil better

My wiring mess. If it's not too noticable, why clean it up?

Who needs a distro block when you can do this? I'm grounded to the chasis for now, but I will be doing a run of 1/0 or 2/0 to the battery eventually.

50.75 in^2 of port, tuned to 32hz.

The Kenwood x889

Mean-Green 200a alt

This is my corroded bat:crying:

Not too bad?

Click to read more...

 

[qtipextra 5,000+ posts]

Eh, I'll give ya credit for thinking of stuff that people could say against it, and using it in the description of each picture. It doesn't look too bad. I would clean it up a lil bit anywayz, just piece of mind.

 

[wesl56 10+ year member]

Who needs a distro block when you can do this? I'm grounded to the chasis for now, but I will be doing a run of 1/0 or 2/0 to the battery eventually.

//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

i hope that is at least for grounds and not +12v and if it is i hope you have it covered with duct tape before you drive around?!?!

 

[tRiGgEr 5,000+ posts]

Meter placement?

Looks really don't matter. As long as you're happy.

 

[Army-Killa]

What is that in a Ranger?

 

[iceteebone 5,000+ posts]

wow what is the deal with that bolt and wing nut?

 

[supraman1379 10+ year member]

Looks good. I would just clean up the wires a bit. And I would also like to know what all that is in

 

[bamaboy 5,000+ posts]

please put some electrical tape on the bolt and nut rigging //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

other than that, as long as it sounds good //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[baseballer1100 5,000+ posts]

It looks good do you live by dixie highway?

 

[Lakota 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif
i hope that is at least for grounds and not +12v and if it is i hope you have it covered with duct tape before you drive around?!?!

It is for ground, notice the fuse block by the amp It wouldn't make any difference if it is for +, anyways. It's not a big deal, it's not going to touch anything positive anyways.

 

[Lakota 5,000+ posts]

Meter placement?
Looks really don't matter. As long as you're happy.

Meter in the kick, windows down and back window closed. Thanks for understanding

 

[Lakota 5,000+ posts]

It looks good do you live by dixie highway?

Yeap, I live right next to dixie. PM me if you ever want to meet up.

 

[Blunt 10+ year member]

put the port on the drivers side and the score will go up

 

[ravendarat 10+ year member]

Well the deck is nicely installed.

 

[squeak12 10+ year member]

It is for ground, notice the fuse block by the amp It wouldn't make any difference if it is for +, anyways. It's not a big deal, it's not going to touch anything positive anyways.

What do you mean it wouldnt make a difference. There are many things it could touch and ground out if it was the +.