MY PORTED BOX BUILD FOR 2 12'S 56k turn around and not walk run away

[80INCHES 5,000+ posts]

well heres the box i design and me and rasheedhos r putting 2gether

( we taking turns putting screws in)

specs:

4.5cubes tuned to 43hz with 101square inch port(5.5x 18.5)

i will be buuilding a port plug hopefully 2day it will be 36sqaure inches tuned to 31hz:yumyum:

well here was we did in like 10mins

thanx to my homie papo for cutting the wood for me:veryhapp://content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

the wood used..birch ply:suave:

im debating should i paint my port or not it wont add deeebeeez

thats all for now..i will have more pix up 2night

and 2morrow it will go on the tl mic in db drag and bass race

80

sorry for the blurry pics i will take better 1's 2day

Click to read more...

 

[NeverEnuffBass 10+ year member]

Resin the inside

 

[80INCHES 5,000+ posts]

i should...i might as well wat to i have to loose

80

 

[B_Campbell 10+ year member]

^ Werd.

 

[Lakota 5,000+ posts]

caulk is yucky

 

[NeverEnuffBass 10+ year member]

i should...i might as well wat to i have to loose
80

Birch resonates differently than mdf

 

[na_rsx 10+ year member]

looks like when you screwed the nail, it sort of pulled the wood apart in the center. either way looking forward to this build.

 

[jmanpc 5,000+ posts]

well heres the box i design and me and rasheedhos r putting 2gether( we taking turns putting screws in)

 

[Wkbdkid 10+ year member]

looks like when you screwed the nail, it sort of pulled the wood apart in the center. either way looking forward to this build.

I noticed that also. What subs is it going to house?

 

[80INCHES 5,000+ posts]

caulk is yucky

thats not caulk its liquid nails

Birch resonates differently than mdf

really i didnt know that...thats good 2 know..i will resin it

looks like when you screwed the nail, it sort of pulled the wood apart in the center. either way looking forward to this build.

i see where u talking about..that was the only split that happened...but alittle woodglue mixed with birch wood dust fixed that problem

80

 

[80INCHES 5,000+ posts]

I noticed that also. What subs is it going to house?

im putting 2 tcsounds 3hp 12's in first...and see how that sounds on the mic..and then im doing a direct swap and putting the se12's in and putting them on the mic

80

 

[jeremiah 10+ year member]

ngay

 

[80INCHES 5,000+ posts]

well i didnt do the 101sqaure inch port ...i did 64.75 square inches

well here is me dry fitting the top of the box

heres is my hand getting caught in the nail with gloves on

koming together

brace

finish product...will see how it does 2morrow

i screwed up and the wrong resin..

80

im happy with the build but the resin part sux

 

[Max_Power 10+ year member]

box looks nice. you need a better camera though

 

[80INCHES 5,000+ posts]

the lighting sucked but it was ok

the build didnt take long..if i wasnt bullshitten around the build would be done in 30mins

80