OP K kicker06 10+ year member Umm, I don't pay for food 2,175 0 Atlanta & South Carolina May 25, 2007 Thread Starter #16 I am just worried about fit still.. 30x30x14 would not fit into my trunk, I needed 3-4" depth for it to fit. So 28x26x14 should fit.
I am just worried about fit still.. 30x30x14 would not fit into my trunk, I needed 3-4" depth for it to fit. So 28x26x14 should fit.
psych0ticnemes1 5,000+ posts Psych0tic Customs 6,004 0 Behind You May 25, 2007 #17 yea, it should fit fine
OP K kicker06 10+ year member Umm, I don't pay for food 2,175 0 Atlanta & South Carolina May 25, 2007 Thread Starter #18 We'll see. The box rp designed has a double baffle on it though, which I don't need. hmmmm
M mlstrass 5,000+ posts Shaggy DOA 10,908 0 Illinois May 25, 2007 #19 Is your trunk opening that small? Intrepids have pretty big trunks actually. I'd pass on the upfiring sub and do a wedge 2 like I suggested and have it rear firing.
Is your trunk opening that small? Intrepids have pretty big trunks actually. I'd pass on the upfiring sub and do a wedge 2 like I suggested and have it rear firing.
OP K kicker06 10+ year member Umm, I don't pay for food 2,175 0 Atlanta & South Carolina May 25, 2007 Thread Starter #20 Nope, top firing is good, i've dont it before. A 30x30x14 will not fit into the trunk from the opening, only the back seat. Trunk is 14" at the back, I want access to spare tire.
Nope, top firing is good, i've dont it before. A 30x30x14 will not fit into the trunk from the opening, only the back seat. Trunk is 14" at the back, I want access to spare tire.
M mlstrass 5,000+ posts Shaggy DOA 10,908 0 Illinois May 25, 2007 #21 Then put the spacesaver spare on the floor of the back seat like I did...LOL
T tez4life Premium Member Premium Member 4,037 1 Mobile, Al May 25, 2007 #22 Then put the spacesaver spare on the floor of the back seat like I did...LOL Click to expand... LOL, now thats a commitment to your car audio.//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif
Then put the spacesaver spare on the floor of the back seat like I did...LOL Click to expand... LOL, now thats a commitment to your car audio.//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif
OP K kicker06 10+ year member Umm, I don't pay for food 2,175 0 Atlanta & South Carolina May 25, 2007 Thread Starter #23 hardly a spacesaver spare nah mean?
rpfuror 10+ year member sound envy 703 0 MD May 25, 2007 #24 I you want to keep the height but get rid of the double baffle you can build it this way. Box Width: 28.00 inches Box Height: 14.00 inches Box Depth: 25.00 inches Slot Width: 4.00 Port1 19.50 Port2 12.00 that will give you 3 @ 32hz w/ 50 sq/in of port
I you want to keep the height but get rid of the double baffle you can build it this way. Box Width: 28.00 inches Box Height: 14.00 inches Box Depth: 25.00 inches Slot Width: 4.00 Port1 19.50 Port2 12.00 that will give you 3 @ 32hz w/ 50 sq/in of port
OP K kicker06 10+ year member Umm, I don't pay for food 2,175 0 Atlanta & South Carolina May 25, 2007 Thread Starter #25 Thanks a lot man! Will do.
OP K kicker06 10+ year member Umm, I don't pay for food 2,175 0 Atlanta & South Carolina May 31, 2007 Thread Starter #26 Can anyone just verify these calculations? I was told by someone else that I need the port 38" long for 32hz tuning.
Can anyone just verify these calculations? I was told by someone else that I need the port 38" long for 32hz tuning.
mazdakid 5,000+ posts CarAudio.com Veteran 11,667 2 illnoise May 31, 2007 #27 i get about 3.3@30 for those dimensions before sub and bracing
mazdakid 5,000+ posts CarAudio.com Veteran 11,667 2 illnoise May 31, 2007 #28 the total port length is probably 39", but it doesnt have to be as long when you use 3 walls of the box as the port 28 wide 14 high 24 deep 4" wide port port 1 19.25" port 2 10" about 3.1@32 after sub displacement
the total port length is probably 39", but it doesnt have to be as long when you use 3 walls of the box as the port 28 wide 14 high 24 deep 4" wide port port 1 19.25" port 2 10" about 3.1@32 after sub displacement
rpfuror 10+ year member sound envy 703 0 MD May 31, 2007 #29 ^^ the dimensionsare accurate. FYI, My dimensions above where dead on (assuming the driver displacements ion the fi web site)
^^ the dimensionsare accurate. FYI, My dimensions above where dead on (assuming the driver displacements ion the fi web site)