IgnoreMe
5,000+ posts
CarAudio.com VIP
So as promised, here are some videos and pictures of the fully loaded btl 15". Also included are pictures of my electrical etc.
-Connected to a kicker kx2500.1 @ 1.4ohms , birthsheet states 2960 @ 2 ohms
-Gain set to give 3kw rms. impedance rise, music dynamics, etc etc will change that, but its set to recieve 3kw
-Its in 4.5^3ft @ 33 hz with 90^2in or port. box idea was basically stolen from ngsm13. yes i had to use a sheet of 3/4" Birch for the front baffle since i didnt want to buy a whole 4x8 sheet of mdf just to cut out that piece.


-Connected to a kicker kx2500.1 @ 1.4ohms , birthsheet states 2960 @ 2 ohms
-Gain set to give 3kw rms. impedance rise, music dynamics, etc etc will change that, but its set to recieve 3kw
-Its in 4.5^3ft @ 33 hz with 90^2in or port. box idea was basically stolen from ngsm13. yes i had to use a sheet of 3/4" Birch for the front baffle since i didnt want to buy a whole 4x8 sheet of mdf just to cut out that piece.


