Activity
No one is currently typing a reply...
Similar threads
Thanks buddy!
Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
- Started by Jodhvir Minhas
- Amplifiers
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
- Started by KarRamRod1999
- Subwoofers
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
- Started by It happens
- Amplifiers
In 1990:
The MTX MTA 225 had a MSRP of 549.95
25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8
The MTX MTA 250 had a MSRP of 649.95
50x2 0.02% THD S/N...
- Started by Courtbass
- Amplifiers
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
- Started by SamuraiRob
- Wiring, Electrical & Installation
About this thread
New threads
-
Another VS ThreadLooking to go for a cheap SQL build in the back of my Jeep...
- Started by Blackout67
- Replies: 3
-
Running two pairs of component speakers activeHello everyone. I need some advice. I am considering...- Started by 6r33n3y3z
- Replies: 10
-
Im trying to hook up a 4 channel ampI currently have a stock head unit with stock amp with jbl...- Started by William Melcic
- Replies: 2
-
Chrysler 300 Dual Battery/350A ALT Connection Help Needed.Hello, New member here. Intermediate knowledge, four...- Started by Virtuous Warrior
- Replies: 3
-
21 Ram 1500Ill try to keep it short. “Base 6 speaker system”. I upgraded...- Started by Dylansnut
- Replies: 1