Mtx 9500 box specs

[SOUNDBASS 10+ year member]

What is best design for a single box for 15 inch mtx.how many cubic feet the whole box should be.the sub is going into a 2016 altima

Click to read more...

 

[Hertz Mafia]

Like 4.5-5 cubes after displacement

 

[Jeffdachef 5,000+ posts]

I've seen one 9500 12 slam really hard on a 2.5 cube box tuned to 33hz

 

[Papermaker85 5,000+ posts]

Like 4.5-5 cubes after displacement

No son..

 

[Boomin_tahoe 5,000+ posts]

Is it the older one or newer one?

 

[SOUNDBASS 10+ year member]

Older silver model

 

[Hertz Mafia]

No son..

Yes pillpopper

 

[shredder2]

What is best design for a single box for 15 inch mtx.how many cubic feet the whole box should be.the sub is going into a 2016 altima

Is this what you got?.. watcha' lookin' for?... Decaf LOWS?..Low tuned daily?.. High tuned Daily?.. SPL?.. be more specific... how much power you planning to run?.. your question is too open to interpretation.

 

[Papermaker85 5,000+ posts]

Yes pillpopper

I had a brother who got in a bad wreck, got addicted to pain killers and died. I don't even take med's for my indigestion issues. The only pills I'll take is antibiotics.

5 is to big. They won't play past 55hz. 4 to 4.25 is as big as they need. The vas nor qms isn't high enough to sound decent in that large a box

 

[SOUNDBASS 10+ year member]

I'm looking low tuned daily,right now I have the massive d2400

 

[Boomin_tahoe 5,000+ posts]

Older silver model

Silver? Lol are you colorblind? What shredder2 posted is white cone, black basket...those are the good ones.

 

[shredder2]

I'm looking low tuned daily,right now I have the massive d2400

If it was mine I'd do a 4ft3 net 6" aero Tuned to 32 hz with that amp... but your car is another matter... what's your available space?.. better yet... what actually will fit in?

 

[SOUNDBASS 10+ year member]

It should the box I have now is 32LONG 22DEPTH AND 14.5

 

[shredder2]

It should the box I have now is 32LONG 22DEPTH AND 14.5

I'd take more time but this'll do... that amp do fine with a 6" port... quick and dirty... here you go

Single .75" material with dowels to brace the large panels and you should be fine...

 

[SOUNDBASS 10+ year member]

Ok any designs