MTX 9500 15" *pic*

ok, 155.1dB @ 47hz
next your going to tell us that was on a stock electrical too? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
the only picture i have it a disposable camera showing my truck and the L.E.D. score board at 155.1.....btw im not some hood rat building boxes for sony woofers. it a 10.5 cu ft box tuned to 37hz. i have build quite a few boxes. ill get some pictures up this weekend on the last 2 installs i did. one was in a 08 caddy escalade w/ 2 15" JBL GTI w/ 2 JBL BPX1100.1. build for SQ tho, tuned to 28hz. ill scan the picture and ill take a pic of the 1st place trophy i got too, its the best i can do

 
A wall of 4 15" 9500's and 4 MTX amps was only 1-2 dB louder than my setup. That's four times the cone area and power. This was also built by a shop, not some hood rat. They're really over rated, imo.
I think I know whom you're talkn about there brotha //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

I dont think this question has been asked yet (or perhaps I missed it), but was this supposed score done in the kick? Or done on a AC meter? Because the combination of both of those would produce a 155 score easily.

 
A wall of 4 15" 9500's and 4 MTX amps was only 1-2 dB louder than my setup. That's four times the cone area and power. This was also built by a shop, not some hood rat. They're really over rated, imo.
i would really have to say that depends on what you are after. i personally like the way they sound.. not loudness, but sq(ish?)

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
860
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

Heavy Hitta

10+ year member
Member
Thread starter
Heavy Hitta
Joined
Location
Long Island
Start date
Participants
Who Replied
Replies
70
Views
4,648
Last reply date
Last reply from
dman4486
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top