mounting depth issue?

misterio
10+ year member

Senior VIP Member
230
0
texas
Is the mounting depth from the outside of the front panel or from the inside? This is really important concerning the subwoofers I ordered (12" CVR)

Red or Blue?

subbox.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Holefully he doesn’t hook batteries in series thinking it halves the voltage…..
29
1K
It is a wives tale if the only evidence could be coincidental. I agree that vibration is bad for everything except women, but that doesn't mean you should factor it into amp location. Two...
32
5K
I would put two Eyelets on front and back close to the bottom of the enclosure with Toggles, rubber washers, and metal washer to seal the penetration to have a rigid hold down. Then run a ratchet...
3
948
just use riv-nuts or clip-nuts, made for blind fastening. some window weld should hold the ring on there pretty good..... being 4x6, you could even do a steel or aluminum adapter plate, just...
4
1K

About this thread

misterio

10+ year member
Senior VIP Member
Thread starter
misterio
Joined
Location
texas
Start date
Participants
Who Replied
Replies
3
Views
479
Last reply date
Last reply from
misterio
IMG_0350.jpeg

DEW123

    Feb 23, 2024
  • 0
  • 0
IMG_5559.jpeg

Buck

    Feb 22, 2024
  • 0
  • 0

Latest topics

Top