memphis 4k impeadence

i dont know. but i hope you have the electrical for them. i heard they had no under voltage protection and alot of people have blown them right as they dip below 12v. i mean thats obviously not good for any amp but most can handle it.

 
i hope noah doesnt get pissed off that im posting PM conversations between me and him, but here is what he told me about the memphis 4k.

Werd.
I've seen people run the ZX2500.1 off a stock alternator before... with Big3 and battery upgrades. It's a really efficient amp, IMO one of the most efficent amps out considering it's power output.

It's one of my favorite amps I've had, I mean, my memphis 4kw has more power... but it is obscene how much current the memphis draws.

Just an example, I did the switch from the 2500.1 to the memphis.

At first, when I burped... the Kicker actually gave me a higher dB reading on the TL than the memphis, when I added a THIRD battery (1 front, 2 back) my TL score went up with the memphis.

So that kind of shows you, that the "2500watt" amp was louder than the "4000watt" amp b/c of the smaller current demand on a burp...

If you're interested, Jason (undercoverpunk) has one for sale that is in excellent condition.

If you need anything else, just ask. My recommendation would be a pair of Fi Q15's and the ZX2500.1 @2ohms (Jason had a pair of Q18's sealed on his amp, and it was great!).

nG
obviously, a good electrical for this amp is a MUST

 
ill trade u my 2 IA 20.1 for your memphis
mmmmm 20.1's strapped @ .5 //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

5k easy //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif//content.invisioncic.com/y282845/emoticons/wacky.gif.cf4a48f9e6dfe9504ffd2c946fd2f340.gif

 
i hope noah doesnt get pissed off that im posting PM conversations between me and him, but here is what he told me about the memphis 4k.

obviously, a good electrical for this amp is a MUST
INDeed.

My final electrical with the memphis 4kw consisted of:

Under hood:

Optima Yellow Top, 220amp Mean-Green Alternator, dual 1/0 big three, triple frame grounds, triple + 1/0 to the rear.

In the rear:

Three Optima D31 Yellow Tops, Triple 1/0 frame grounds, Triple + 1/0 inputs from front.

I like overkill... my voltage barely ever dropped below 13v...

nG

 
INDeed.
My final electrical with the memphis 4kw consisted of:

Under hood:

Optima Yellow Top, 220amp Mean-Green Alternator, dual 1/0 big three, triple frame grounds, triple + 1/0 to the rear.

In the rear:

Three Optima D31 Yellow Tops, Triple 1/0 frame grounds, Triple + 1/0 inputs from front.

I like overkill... my voltage barely ever dropped below 13v...

nG
how much did you gain on the TL over the 2500.1 after all the upgrades?

overkill is never a bad thing either IMO //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

No undervoltage protection FTL
i have heard that before. i guess they expect you to know that you need a solid electrical to support a 4kw amp, but its obvious (at least on this forum), that some people dont know what kind of an amp it is. they say "is a stock alt and a 500cca battery ok to run this amp?", and some people say "ya, it'll work" //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif *magic smoke*

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

matrxx dude

5,000+ posts
TEAM DB UNIT
Thread starter
matrxx dude
Joined
Location
tifton ga
Start date
Participants
Who Replied
Replies
19
Views
1,223
Last reply date
Last reply from
Zeuslicious
1778578257023.png

Glen Rodgers

    May 12, 2026
  • 0
  • 0
Screenshot_20260511_212804_Amazon Shopping.jpg

Blackout67

    May 11, 2026
  • 0
  • 0

New threads

Top