mvw2 10+ year member
Senior VIP Member
Ok, I'm just going to do a mass cleaning of everything I have
HU:
Price: $350 (firm)
http://www.jvc.com/product.jsp?pathId=130&modelId=MODL027433&page=1
Tweeters:
[*]Alpine Type-X (Vifa XT19) tweeter pair
Price(F#1): $150
Price(Type-X): $$35
Woofers:
[*]Mach 5 Audio MLI-65 6.5" woofer pair
Price(AA Poly): $80
Price(Mach 5): $60
Subwoofers:
[*]Phoenix Gold RSD12d 12" DVC subwoofer
[*]Sonicraft SC12NRT 12" subwoofer
Price(TC Sounds): $125
Price(PG): $105
Price(Sonicraft): $130
Any questions, comments, just ask. I'll be happy to answer anything, explain stuff out, suggest enclosure sizes, etc.
I do have more pics of everything I have listed here in case you wanted more angles, extremely high res, etc.
Most everything has its original box, parts, and documentation. The tweeters are Pacparts/PartStore pieces, so there's almost no mounting hardware. Another member kindly gave me a pair of mounting cups for the Type-X tweeters, and I did find the Alpine logo for the other F#1 tweeter if you want it. Those mounting cups are hard to find.
Everything is used but in great condition with little or no markings. I do tend to take good care of my stuff.
I am somewhat flexable on pricing for most of the stuff as it is used. You can haggle some, but whoever pays listed price first gets it.
HU:
- JVC KD-AR8500
35w rms x 4(70w x 4 max) internal amp
- Full 3-way active processing, x-over & time alignment
- 9-band graphic/3-band parametric
- SD Card reader(supports at least 1gig size)
- 5V RCA preouts
- 24-bit Burr Brown DAC
- Very stylish black finish
Price: $350 (firm)
http://www.jvc.com/product.jsp?pathId=130&modelId=MODL027433&page=1
Tweeters:
- Alpine F#1 (Scanspeak D2904/6000) tweeter pair
silk dome
- transparent, clean sound
- flat frequency response below 1kHz
- very low frequency crossover usability
- robust, non-fatigueing sound
[*]Alpine Type-X (Vifa XT19) tweeter pair
- compact 3/4" tweeter
- great off-axis usability
- usability down to 3kHz
- extended top end detail
- silk dome
- comes with mounting cups!!!
Price(F#1): $150
Price(Type-X): $$35
Woofers:
- AA Poly 6.5"(7" really) woofer pair
long throw design
- extended top end
- good off-axis response
- punchy bass
[*]Mach 5 Audio MLI-65 6.5" woofer pair
- broad, flat frequency response out to 4kHz
- very easy to cross and blend
- good low end extention
- laid back sound
- will happily take lots of power
Price(AA Poly): $80
Price(Mach 5): $60
Subwoofers:
- TC Sounds TC2+ 12" DVC subwoofer
ultra low distortion
- clean, full-bodied sound
- Oaudio design for compact enclosures
[*]Phoenix Gold RSD12d 12" DVC subwoofer
- Thick, full sound
- Very extended low frequency response(~30Hz or under F3, sealed)
- Suitable for large "ideal" or compact enclosures without heavy side-effects
- will take TONS of power without fail(PG tested to 2000w rms to not fail)
[*]Sonicraft SC12NRT 12" subwoofer
- musical and transparent sound
- high impact bass notes(crisp)
- great low frequency extention(35Hz sealed, 20Hz ported)
- Designed for large enclosures(3cu.ft. sealed, 6 cu.ft. ported)
Price(TC Sounds): $125
Price(PG): $105
Price(Sonicraft): $130
Any questions, comments, just ask. I'll be happy to answer anything, explain stuff out, suggest enclosure sizes, etc.
I do have more pics of everything I have listed here in case you wanted more angles, extremely high res, etc.
Most everything has its original box, parts, and documentation. The tweeters are Pacparts/PartStore pieces, so there's almost no mounting hardware. Another member kindly gave me a pair of mounting cups for the Type-X tweeters, and I did find the Alpine logo for the other F#1 tweeter if you want it. Those mounting cups are hard to find.
Everything is used but in great condition with little or no markings. I do tend to take good care of my stuff.
I am somewhat flexable on pricing for most of the stuff as it is used. You can haggle some, but whoever pays listed price first gets it.