SOLD Massive Collection sale -Amps Mids Crossover etc

[darqnez 10+ year member]

Hello, I love my gear but now need $$$ to fund a new project, I hate to see this stuff go, all of it has been carefully chosen and stored in a controlled non smoking environment (inside closet).

I work and travel alot so please be patient with PM replies, and also shipping as that will most likely only be available on weekends.

Please use PM only to contact and its all OBO

AMPS:

There are no missing terminals (screw or hex) on any of these amps, some are like new, some have minor scratches and normal wear.

Phoenix Gold Collection

Phoenix Gold X200.4 used 200w at any ohm, dual power connection

$285 + ship (+3% PP fees)

* Power Output: 200W x 4 (RMS) @ 4, 2, & 1 Ohms

* Power Output (Bridged MONO): 400W x 2 (RMS) @ 8, 4, & 2 Ohms

* 1 Ohm Stable (In 2 Channel Mode), 2 Ohm Stable when Bridged Mono

* Xe.flow Variable Thermal Feedback Controlled Fan

* Xe.tune 24dB Linkwitz-Riley High Pass / Low Pass Varaible Crossover

* Xe.load Optimized for Any Impedance Operation

* Tried and True Triple Darlington Output Stage

* Buffered RCA Full Range Thru Output

* Remote Monitoring Display (RMD) Port

* Low Pass Level Control Ready (LPL44)

* Frequency Response: 20 to 20,000 Hz

* Signal to Noise Ratio: >90dB

* Crossover Range: 40 to 400Hz

* Bass Boost: +18dB @ 45Hz

* Recommended Fuse Size: 120 Amps

* Power / Ground Wire Size: 4 AWG

* Dimensions: 22"L x 10.6"W x 2.5"H

Phoenix Gold Tantrum 400x4

Tantrum 400.4

Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) . . . .20 x 4

Into 4 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . . .50 x 4

Into 2 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .100 x 4

Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .200 x 2

Recommended Fuse Size . . . . . . . . . . . .25A x 2 ATO style

Dimensions without Endcaps . . . . .11.75L x 10.0W x 2.35H

Dimensions with Endcaps . . . . . . .16.75L x 10.0W x 2.35H

$175 + ship (+3% PP fees)

Phoenix Gold Tantrum 500.2

Tantrum 500.2

Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) . . . .50 x 2

Into 4 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .125 x 2

Into 2 ohms Stereo @ 14.4 Vdc . . . . . . . . . . . . . . .250 x 2

Into 4 ohms Bridged @ 14.4 Vdc . . . . . . . . . . . . . .500 x 1

Recommended Fuse Size . . . . . . . . . . .30A x 2 ATO style

Dimensions without Endcaps . . . . .11.75L x 10.0W x 2.35H

Dimensions with Endcaps . . . . . . .16.75L x 10.0W x 2.35H

$175 + ship (+3% PP fees)

Phoenix Gold 1200.1

Tantrum 1200.1

Into 4 ohms @ 12.5 Vdc (IASCA/USAC) . . . . . . . . .250 x 1

Into 4 ohms @ 14.4 Vdc . . . . . . . . . . . . . . . . . . . .1200 x 1

Into 4 ohms @ 14.4 Vdc (Dynamic Power) . . . . . .1400 x 1

Recommended Fuse Size . . . . . . . . . . . . . . . . . . .80 Amps

Dimensions without Endcaps . . . . .11.75L x 10.0W x 2.35H

Dimensions with Endcaps . . . . . . .16.75L x 10.0W x 2.35H

$250 + ship (+3% PP fees)

All PG manuals can be found here:

ftp://www.rodinaudio.com/Phoenix%20Gold%20Mobile%20Audio/Manuals/

 

Memphis ST series amp collection

16MC250D $100 + ship (+3% PP fees)

(2X) 16MC500D $140 + ship (+3% PP fees) each

16MC1000D $175 + ship (+3% PP fees)

SPEAKERS:

Mids, Mid tweets, and Mid Bass collection

Adire Koda's Pair +1 extra $125 + ship (+3% PP fees)

Rainbow SLC 265 (non kick) $125 + ship (+3% PP fees)

CDT HD M6+ $150 + ship (+3% PP fees)

CDT HD-3 $125 + ship (+3% PP fees)

CDT HD-2 Super Midtweets $125 + ship (+3% PP fees)

Digital Designs DW6 $150 + ship (+3% PP fees)

DLS Ultimate Iridium 3" mids $150 + ship (+3% PP fees)

MB Quart 3" Mid (square ones) $50 + ship (+3% PP fees)

(please google specs on these if you have questions, too much info to include)

CROSSOVERS:

Crossover Collection

CDT ES/HD300 3way $100 + ship (+3% PP fees)

CDT SatNet 480 $50 + ship (+3% PP fees)

CDT M200 $50 + ship (+3% PP fees)

CDT SatNet 456 $50 + ship (+3% PP fees)

CDT 350-SA456-4 with image tweeter out $75 + ship (+3% PP fees)

Rainbow SLC 256 $60 + ship (+3% PP fees)

Rainbow CAL 25 Network $50 + ship (+3% PP fees) This is missing one screw terminal, all others are complete

Adire Koda crossover $50 + ship (+3% PP fees)

Mpyre 65x crossover $70 + ship (+3% PP fees)

Again please google for more info

PROCESSORS - SPECIALTY ITEMS

Audio Control Matrix line driver $OLD

Phoenix Gold TLD 66 Line driver $80 + ship (+3% PP fees)

Kicker Mid-Bass passive crossovers $50 + ship (+3% PP fees)

Phoenix Gold Subwoofer Crossover $65 + ship (+3% PP fees)

A couple of Line converters $15 + ship (+3% PP fees)

Please PM with offers, thanks guys.

Click to read more...

 

[drtjmpr909 10+ year member]

You wouldnt happen to have an LPL44 layin around would ya?

 

[darqnez 10+ year member]

Ha Yes I do, buy an amp, get one free!

 

[drtjmpr909 10+ year member]

$30 shipped an you can even pick the amp for me! You gotta deal!

 

[UNCchef 10+ year member]

do you still have the CDT ES/HD300 3way ??

 

[ciaonzo 5,000+ posts]

Some very nice gear. I might be interested in the pair of M6+ but I'm not a huge fan of paying other people's PayPal fees when I have my own to pay. Thus, my next move will be to lowball you.

J/K.

 

[RetroAudioinc 5,000+ posts]

Do you still have these? Total shipped to 32807 and discount for more then one item??

Digital Designs DW6 $150 + ship

CDT HD-2 Super Midtweets $125 + ship

Phoenix Gold TLD 66 Line driver $80 + ship

 

[darqnez 10+ year member]

Nope sorry, Ill update the thread

do you still have the CDT ES/HD300 3way ??

 

[ciaonzo 5,000+ posts]

Bump for a nice guy.

 

[DB-Audio 10+ year member]

trade you an o scope for the memphis 1000 or something

 

[rusty_armadillo 10+ year member]

How was the output on the DD mids? Comparable to the m6+?

 

[darqnez 10+ year member]

Output about the same but in testing (I couldn't get the door panels on with either due to the spacers I had to use, so they were only tested, never actually used) I could cross the DD at 60 and still get loud with them, the m6+ liked it at 100 and up and stayed really clean and punchy.

In a sealed box test though, I would say my opinion on these is that the CDT is one of the best Mid basses i have had and that the DD are really subwoofers which can get very low for what they are. You could use the M6+ as a sub as well but they really shine at mid-bass, the DD are good at midbass but they can get low enough to be used as a sub.

If I were to have a vehicle that could accommodate a 4 way front stage, I would use the DD at 50-100 18slope, M6+ 100-350 18slope, cdt hd3 or dls 3.5 450-2000 12 slope, and then some cal25 or hybrid tweets at 3000 and up and 12slope.

slopes dependant on testing and vehicle.

How was the output on the DD mids? Comparable to the m6+?

 

[darqnez 10+ year member]

No thanks, I need the cash more than anything.

trade you an o scope for the memphis 1000 or something

 

[DB-Audio 10+ year member]

No thanks, I need the cash more than anything.

no prob

 

[Trancer 10+ year member]

D a m n. I want all three of those PG Tantrums