mag bumpin..

[Johnny Drama 5,000+ posts]

After all, it's not out of your ***...

Even though that is K&B its still a good example. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[slikrider20 10+ year member]

Yeah, you said most did it's RATED power at 10% distortion, this one doesnt even get up to 1400w at 10%...at 14.4 v

 

[CBFryman2 5,000+ posts]

9.1 is hyped by Ben.

 

[CBFryman2 5,000+ posts]

That is for a BX1500...Im not argueing that it does 1300w with 10% distortion.

 

[CBFryman2 5,000+ posts]

They have the same board as a number of other amps including DEI's 1100w amp...This I know. Cool how DEI rates it to 1100w and Ben says it does a clean 1500w. Not the same exact circutry...but similar.

 

[slikrider20 10+ year member]

Jntar, i see that you have a mag d2 in a 1.2cf sealed enclosure...??how does that satisfy you? lol

 

[Johnny Drama 5,000+ posts]

9.1 is hyped by Ben.

9.1=value electronics, guess who else they make amps for?

I am not a fan of Ben, but the 9.1 is a solid performer.

That is for a BX1500...Im not argueing that it does 1300w with 10% distortion.

As I said, the BX line...not limited to model.

 

[Johnny Drama 5,000+ posts]

They have the same board as a number of other amps including DEI's 1100w amp...This I know. Cool how DEI rates it to 1100w and Ben says it does a clean 1500w. Not the same exact circutry...but similar.

I dont care what Ben says...Its rated at 1200rms @1ohm plain as day.

http://www.edesignaudio.com/edv2/product_info.php?cPath=21&products_id=44

 

[Johnny Drama 5,000+ posts]

Jntar, i see that you have a mag d2 in a 1.2cf sealed enclosure...??how does that satisfy you? lol

I have a much smaller cabin then you do. I drive a regular cab truck. It sounds very clean, plays nasty low, and shakes my whole truck. I had two, but never hooked them both up for more then a few hours. I wish I had never sold the second one.

 

[slikrider20 10+ year member]

Yeah, if i had the oppurtunity, i'd have 2 of these bad boys, i never thought i could get that much authority out of a single sub.

 

[CBFryman2 5,000+ posts]

As I said, the BX line...not limited to model.

BX1205d is has entirely different circutry design. the 05 is when they reformed them to do rated power with less distortion. 06 they changed the case.

 

[CBFryman2 5,000+ posts]

I dont care what Ben says...Its rated at 1200rms @1ohm plain as day.http://www.edesignaudio.com/edv2/product_info.php?cPath=21&products_id=44

//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

MD2 is rated 1800w RMS plain as day.

 

[Johnny Drama 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gifMD2 is rated 1800w RMS plain as day.

Prove it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

http://www.usamps.com

go to products

click on merlin2

look at MD2D

Tell me what it says...

 

[CBFryman2 5,000+ posts]

The manual says 1800w x1. Rumors of it benching that figure though I can not cite evidence to back that up.

 

[Johnny Drama 5,000+ posts]

The manual says 1800w x1. Rumors of it benching that figure though I can not cite evidence to back that up.

So not only do several of them have RCA input noise issues, but now we dont even know what they are rated at? One rating on the website and another on the manual?

WAY TO GO US AMPS!!!