Looking for wiring help !!

[toyotacelica 10+ year member]

I have (6) 12" kicker comps w/2000 watt power acustic class D mono block amp..

here are the specs for each speaker..

•12" 4-ohm subwoofer

•frequency response: 27-500 Hz

•power handling: 50-150 watts RMS

•peak power: 300 watts

•sensitivity: 89.1 dB

*single voice coil

How should i wire them ?

Click to read more...

 

[LosIsATool 5,000+ posts]

Your amp is only 1 ohm stable. So you must wire at 2.67.

 

[LosIsATool 5,000+ posts]

Like the bottom diagram just add 2 more subs. I cant find one with 6

Subwoofer Wiring Diagrams, Four 4 ohm Single Voice Coil (SVC) Speakers

 

[toyotacelica 10+ year member]

Thank you brah.. this is good, ill try to start here and see what happens..

i think this is how the dude had them hooked up in the old box for the blazer

 

[toyotacelica 10+ year member]

ok so the way i have them setup is three in the backseat and three in the trunk... am i going to wire the 3 in the trunk in series , the 3 in the backseat in series and then b4 i hook them to the amp i wire them parallel from both pairs of series?? is this right

 

[LosIsATool 5,000+ posts]

You need to find a way to follow the diagram.

 

[toyotacelica 10+ year member]

i ajusted the diagram to sets of three, looking at the new pic i think im going to take the pos and neg from both sets of series and take that to the amp.. sounds about right? or like you said add 2 speakers to the diagram and follow that.

 

[LosIsATool 5,000+ posts]

That shows series,, You want what I showed you. Series/parallel