Looking for 6.5-7" midbass for 3 way active sq install

[loudenuff]

Title says all. Will be ran off of a JL jx360/2, I'm looking at CDT, some cheap hertz I found on eBay, and ssa evils but I don't have the power to push those evils at 4 ohms. Just looking for more opinions. Budget is $300

Click to read more...

 

[LosIsATool 5,000+ posts]

$300 for 1 or a pair?

 

[loudenuff]

$300 for 1 or a pair?

Preferably a pair. Something that'll cover 60~1000hz. Not looking for top top end, more or less for cheaper raw drivers that do well with proper tuning

 

[mylows10 5,000+ posts]

If you need more info on cdt. Hit me up. I've got a cdt 3 way active set. That I own and can recommend for you

 

[ace_800 5,000+ posts]

I've got a pair of DD 6.5LT's. Beast little subs/mid, in the sub FS area.

 

[LosIsATool 5,000+ posts]

Preferably a pair. Something that'll cover 60~1000hz. Not looking for top top end, more or less for cheaper raw drivers that do well with proper tuning

You shouldn't need to run the mid down to 60hz. That's just going to add a lot of distortion, let the sub handle that. The more cone area you can get in the mid bass area the better it will be.

These are pretty much ARC blacks.

https://www.madisoundspeakerstore.com/sb-acoustics-woofers-6-7/sb-acoustics-sb17nrxc35-4-6.5-woofer/

 

[Papermaker85 5,000+ posts]

Id probably go with dayton audio reference.

 

[The Camry]

Preferably a pair. Something that'll cover 60~1000hz. Not looking for top top end, more or less for cheaper raw drivers that do well with proper tuning

Sls 6 or 8

Sent from my SGH-M919 using Tapatalk