Lanzar 2000D running two 15s...?

[caraudiofanatic 10+ year member]

Is a Lanzar 2000D powerful enough to run two kicker 06S15L74s if run @ a 4 ohm load? or even a 1ohm load...?

Cheers

Click to read more...

 

[hoxie08 5,000+ posts]

whats its RMS?

 

[massiveaudiocw 10+ year member]

opti2000d? if so that would give each driver around 800rms @ 1

 

[caraudiofanatic 10+ year member]

Yes, its the Opti 2000D

700rms @4ohm

1600rms+ @1ohm (1600rms @ 1.3ohms)

I was hoping to run it at 4ohms so i can get away with using a 60-80amp fuse in my distribution block.

 

[n2audio 5,000+ posts]

Yes, its the Opti 2000D
700rms @4ohm

1600rms+ @1ohm (1600rms @ 1.3ohms)

I was hoping to run it at 4ohms so i can get away with using a 60-80amp fuse in my distribution block.

well sure, it would work, but why would you want to choke off two monsters like that with 350w/pc when you have 800/pc at your disposal?

 

[BassBallin]

run then at 1 ohm

 

[bk12321 10+ year member]

I know I would be unhappy with 350/per with those subs

 

[BassAddictJ 5,000+ posts]

I know I would be unhappy with 350/per with those subs

ya 350w is not enough for L7's. 1 ohm would be so much better for those subs. Forget the whole small fuse crap, do it all right. Make sure you have 1/0 all around, big 3 done, and a n upgraded battery OR extra battery in the trunk. if your electrical is up to par, that optidrive will do you justice

 

[caraudiofanatic 10+ year member]

Cheers all for the good advice! Appreciate it.

I think i have everything covered sufficiently on the electrical side; 0AWG power/ground with 200amp inline fuse, uprated battery.

I think im ready to blow my head off with BASS now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif