L7 handle in box

[TRANSAMCHARGER2 10+ year member]

I was thinking of running 2 12" L7 with 1500 watts in a 5 cu ft box ported to 35 hz, will the subs handle that wattage 750 apiece in that box

Click to read more...

 

[mgaidica 10+ year member]

yes... seeing that all the amp settings are correct.

 

[james33440 10+ year member]

Nice setup. You won't be disappointed. As far as having too much power, Check Sig...//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Just remember to not go too crazy with the gain and bass boost. Also, don't blare your volume either. Keep all of this in mind, and you will have a nice setup for a long time. Or, well, at lease until you decide to upgrade. Believe me, you will. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[TRANSAMCHARGER2 10+ year member]

What volume shouldn't i go past i have a pioneer hu and i think it goes to 60 volume wise

 

[i3abyjay25 10+ year member]

blast it as loud as u can without hearing any distortion...

 

[mgaidica 10+ year member]

volume numbers are irrelevant. it depends on how you amp settings are, and HU settings are. But as said above.. the point until distortion- ide try to stay away from even getting to distortion, you will know when to turn it down and what HU settings to play with once u install it ... but remember thats considering your gains are set correctly cause if they arnt ull get distortion at low volume levels...

 

[TRANSAMCHARGER2 10+ year member]

all right another question, what size box ported to 35 hz, should i run 2 15" L7 with 1500 watts apeice going to them, i dont want a large box right

 

[mgaidica 10+ year member]

5 cubes would be nice..

 

[TRANSAMCHARGER2 10+ year member]

goin 500 watts over rms in 5 cu ft wont hurt them

 

[mgaidica 10+ year member]

hmmm.. i didnt read the 1500 watts TO EACH part.. Personally i think they would take it.. some dont, but i know those subs can handle a lot. you could go 4 cubes and be safe, but i think 5 would be ideal.. Y not send each 750 in a 5 cu ft box? those will still bang!

 

[TRANSAMCHARGER2 10+ year member]

well i was lookin at rangermans moded d2 amp, if i could run it at 3000 watts at .5 ohms id get that

 

[TRANSAMCHARGER2 10+ year member]

or i can run the amp at 2000 watts how would the 2 12" L7 hadle with 250 watts over the rms

 

[mgaidica 10+ year member]

first off, .5 ohms isnt great for daily running. The 12" L7 can take 1000 watts but as said u need to watch all ur settings (gain, volume etc.)