KnuKonceptz: Amp Installation Kits

  • 3
    Participant count
  • Participant list

Golitan11

Member
86
0
Canada
I ordered my subwoofer (Sundown SA-12) and amplifier (Hifonics BRX1100.1D) a couple days ago and the only things missing for my setup are wires. I want to buy from KnuKonceptz because it is the least expensive in Canada (so do not suggest me other brands please).

1. I just wanna know if there are any difference that should worth the money between these kits:

http://www.knukonceptz.com/productDetail.cfm?prodID=KOL-AK4

4 Gauge Amplifier Installation Kit

Also, I plan to do Big 3 and I have all stock electrical now. Here are some questions:

2. Do I really need to change my battery terminals or I can fix ring terminals on my stock ones?

3. Some say it is better to place the fuse closer to the alternator, while some say closer to the battery. Any suggestions?

Thanks.

 
Buy the 1/0 gauge kit. So you won't need to upgrade in the future..

Use 1/0 gauge solder ends and buy a adapter bolt for the battery.(side mount) you will need to upgrade battery terminals if your going to do a big 3 upgrade.

I upgraded All my wires under the hood with knu 1/0 gauge and soldered ends plus a 220a alternator

I placeed 2 250a ANL Fuses about 12" from the battery on the 2 1/0 gauge runs back to the trunk hooked to 2 C&D batteries and 2 BC3500s

 
Well ur anwser to number 3 id say alt ur pumping it.out the alt to.the battery thats were i.have mine and ive seen people.not even use fuses so.i guess to.each is different just my 2cents

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I dont remember one recently. The kit is a fair enough price for what it comes with IMO
1
918
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
229
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
264
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
334

About this thread

Golitan11

Member
Thread starter
Golitan11
Joined
Location
Canada
Start date
Participants
Who Replied
Replies
2
Views
940
Last reply date
Last reply from
urmomsmin3
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top