Kicks way louder then bass

[wickedwitt 10+ year member]

Simmer down Taylor. Many MANY people are misinformed or have no idea how to properly set Xovers for a good balanced musical response. Hell, it took me 10 years to figure out I had sharp valleys in my frequency response because I had crossed them out of existence.

 

[TaylorFade 10+ year member]

Simmer down Taylor. Many MANY people are misinformed or have no idea how to properly set Xovers for a good balanced musical response. Hell, it took me 10 years to figure out I had sharp valleys in my frequency response because I had crossed them out of existence.

Lol. Why does everyone always think I'm all worked up?

 

[wickedwitt 10+ year member]

Your post about leaving an entire octave out just seemed like you were.

 

[Beatin' 10+ year member]

"Hey guys, my subs kick so hard"

what exactly is the problem? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[J31Rob 5,000+ posts]

Lol. Why does everyone always think I'm all worked up?

Look at the forum you're on.

 

[groundpound4200 5,000+ posts]

Lol. Why does everyone always think I'm all worked up?

U Mad?

 

[IonRL205 10+ year member]

Maybe you're listening to a poorly recorded song.

 

[brandon_s0854 10+ year member]

OEM HU's sometimes have some nasty EQ in them. Could be accentuating upper sub bass and pulling the lower frequencies. They do this so you don't blow your stock speakers.

This is my guess. Some stock HU's have a specific output for subs. I would turn that lpf back up to ~100hz and see if you're getting a ton of output around 100hz and very little below 50hz. To me, that would be a red flag that the HU has a built-in hpf. See if it has a different output for subs. Just my best guess without knowing much about the installation.