just seeing if i can get remotely close..

[Strecker25 10+ year member]

i know you guys hate this but i gotta know how close (if at all) i came...

after displacement internal vol. = 4.051 cubes

15.5 x 1.824" port , 10.853" long. Port area of 28.27"^2

i was attempting to get a tuning of 35hz, i know numbers arnt exact but is it close? because i got plans from diamond (this is for a 15" cm3) in which the box is 22 x 17.5 x 21.5, and a port with dimensions of 3 x 16 x 39. And that was just so much different than what i came up with.

Id like to use my design if its close, as i think itd get slightly louder. //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

Click to read more...

 

[Thuracine187 10+ year member]

your calculations are close, but its gonna be hard to cut your mdf to 10.853

I would round up and redo the math to get the same tuning

the box dimensions you got from diamond would be a box with a volume 2.4 after displacements tuned to about 28 hz

 

[Strecker25 10+ year member]

if i redo my design should i use more port area, since theirs was pretty high on the design i got from them

thanks for your help btw

//edit: diamond tech emailed me and said they recommend 2 4inch round ports, 10 inches long. anyone care to explain what that would amount to in terms of sq inches for a rectangular port?