Just a question?

[alfonsoleo 10+ year member]

1500 watts x 1 chan. @ 2 ohms even the memphis dealers will tell you not to wire it down any lower then 2 ohms so I think you should know your shit before you talk and im thinkin nobody here has wired the amp down lower?

 

[Toone 10+ year member]

1500 watts x 1 chan. @ 2 ohms even the memphis dealers will tell you not to wire it down any lower then 2 ohms so I think you should know your shit before you talk and im thinkin nobody here has wired the amp down lower?

hmm specs....http://www.memphiscaraudio.com/products/amplifiers/class-d-mclass-amplifiers/

Rated at 1 ohm? im pretty sure it is.

 

[nineball 10+ year member]

1500 watts x 1 chan. @ 2 ohms even the memphis dealers will tell you not to wire it down any lower then 2 ohms so I think you should know your shit before you talk and im thinkin nobody here has wired the amp down lower?

you obviously don't know your shit

 

[alfonsoleo 10+ year member]

http://www.sonicelectronix.com/item_4034_Memphis+16-MCD1500.html

look under spec. it will tell you Minimum Impedance Bridged N/A because it isnt supposed to be wired down any lower then 2 ohm on ONE channel sir.

 

[alfonsoleo 10+ year member]

and thats why Power Acoustik!

 

[NightDrifter05 10+ year member]

So you are going by the specs on a online retailers site over the manufacturer site? I think the PRs were blown due to a user error since I had 2 Memphis PR 12s at 1ohm on a Memphis ST1000d and they had no problem handling it. Not to mention I know multiple people running the subs on the MC1000D.

But to answer your question yes the MC1500D is fine at 1ohm as long as you have the electrical to back it up.

 

[nineball 10+ year member]

So you are going by the specs on a online retailers site over the manufacturer site?

x2 ya newb

 

[alfonsoleo 10+ year member]

I'm not so sure they are even the same amp, It seems to me that the site has an updated m series 1500d sir and even my Local dealer said that if you wire it down the (amp I bought off him as I post earlier) to one ohm load or lower Memphis will not warrenty if it blows!

 

[alfonsoleo 10+ year member]

http://www.sonicelectronix.com/item_...6-MCD1500.html

this isn't

http://www.memphiscaraudio.com/produ...ss-amplifiers/

 

[aaronrchr 10+ year member]

buy the subs, hook them up to the amp, see what happens

/thread

 

[GMCJimmyslt2000 10+ year member]

u are slow my guy..

Mofos ****,i hate to break the news to you that they are, but all PA audio equipment sucks.

That amp is 1ohm stable, why wouldnt you believe the manufactures specs, they did make the equipment.