JL W7 Wiring

[eh69cmaro 10+ year member]

Since i didnt go with the 1000/1 series amps to power the W7's up. How would i wire them to get the most out of them on a Hifonics 2600 Brutus. Im Wiring them a pair per amp. HELP PLEASE

Click to read more...

 

[azeroth123 10+ year member]

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp just wire em to the least resistance that the amp is stable at

 

[helotaxi 5,000+ posts]

What model W7? If it's any but the 13W7 just wire them in parallel. If it's 13W7s wire the coils of each sub in series and wire the subs in parallel.

 

[eh69cmaro 10+ year member]

The 13.5 JL audio. how should i wire it down to get the most out of the sub. Since they are 1.5 ohm and the amp goes down to a 1 ohm load i wanna get the most out of the sub. Any suggestions

 

[helotaxi 5,000+ posts]

I told you in the previous post exactly how to wire them. The 13W7s are dual 1.5 ohm coils. The final load that you want them wired to is 1.5 ohms. Series the coils of each sub (connect the + of coil 1 to the - of coil 2) then parallel the subs (connect the - of coil 1 to the amp - and the + of coil 2 to the amp + for each sub).