JL Stealth going to cut it in Tahoe?

Motovet
10+ year member

Senior VIP Member
I got the Stealth for the console and a 250/1 used a while back in anticipation of building a system in our Tahoe. Now I have a set of Germs and a Zed Duece for the fronts and am worried the (1) 10" won't cut it. I would just go ahead and install it and see how it sounds....but ****, that is a lot of cutting to the console to make it happen.

So I am wondering from those with experiance with these, how well do they put out, and will it even come close to my (2) 10W3v2's off 500W in my truck? Also if it were your Tahoe what would you put in there. Can't use the cargo space.....

 
I got the Stealth for the console and a 250/1 used a while back in anticipation of building a system in our Tahoe. Now I have a set of Germs and a Zed Duece for the fronts and am worried the (1) 10" won't cut it. I would just go ahead and install it and see how it sounds....but ****, that is a lot of cutting to the console to make it happen.So I am wondering from those with experiance with these, how well do they put out, and will it even come close to my (2) 10W3v2's off 500W in my truck? Also if it were your Tahoe what would you put in there. Can't use the cargo space.....
4 15's but i'd have to use the cargo space //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

 
I ordered a custom box from Q logic for a eight that goes forward of the center console. I cut the round hole out to a square so the s8l7 would fit. I also have a stock 8" sub in the back that will be getting replaced with probably a 8" cvr from kicker as well. It really does hit pretty hard its not a 12" but its hidden and doesn;t take up any space and your not cutting anything that you cant put back if you dont like it. This only works on the "00" to "02" burbs and tahoes as I remember.

 
Thanks so far....I really don't want to go to all that work and be dissapointed. And this was going to be a simple system to replace the awful Bose for the wife. Now she already has a better front stage than the truck. //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif Well maybe I would do something in the back that could be removed when needed? Maybe a 12" sealed running off the Zed 600.1? Suggestions?

 
Well I am now convincing myself the Stealth is not going to keep up with the rest of the system. Now thinking maybe SP's or the new BM's. If I do use up some cargo space I want to keep it to a minimum if possible, and may stay with the Zed theme and pick up their 600.1. Two tens...two twelves....one 15"? Also I am very handy but don't own a table saw, so is there a good source for boxes that would work well with any of these subs? Thanks for any more input.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Motovet

10+ year member
Senior VIP Member
Thread starter
Motovet
Joined
Location
South Bend Wa.
Start date
Participants
Who Replied
Replies
6
Views
559
Last reply date
Last reply from
Motovet
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top