SOLD!!!!!!!
Up for sale is my JL Audio 300/2. Many of you may have noticed me spamming this thing recently. I've gotta get it sold, so I might as well give it a thread to bump.
Price:
$140 shipped OBO, but I think the price is fair (PAYPAL only)
Specs:
•150 watts rms x2 @ 1.5 - 4 ohms
•300 watts rms x1 @ 3 - 8 ohms bridged
•Dual N-Channel MOSFET power supply
•LED power indicators
•Absolute Symmetry™ Class A/B Circuit
•Differential-balanced with RCA jack inputs
•H-Bridge amplifier topology
•Pulse width modulation-regulated switching power supply
•2/1 operation
•Output Polarity Reversal Switch permits instant output polarity reversal
•Selectable as pass through, tracking LP or tracking HP Preamp RCA outputs
•Variable high-pass filter (50-200 Hz, selectable 12 or 24 dB/octave)
•Variable low-pass filter (50-200 Hz, selectable 12 or 24 dB/octave)
•Subsonic Filter (24 dB at 15 Hz)
•Frequency response: 5-30000 Hz
•Dimensions: 13.4"L x 9.25"W x 2.27"H
•4-gauge power and ground
Condition:
I'd say it's a solid 8.5-9/10
There's one .5" scratch at the top left of the heatsink that I was unable to buff out. There's a little wear at the bottom of the heatsink's facing as well, but it's nothing major & detracts very little from the amp's appearance. Any other imperfections are barely visable.
After receiving the amp I refinished the endcaps, heat fins and back plate. If you want a custom color that matches your vehicle, that would be easily achieved. It's all bolt on/off parts that can be painted any color you like. All of the pita sanding has already been taken care of too, so changing colors at this point would require little to no prep work.
Functionality:
Amp is tested and in fine working order. It's ready to throw at a pair of nice components.
Pics:
Feel free to PM questions...
SOLD!!!!!!!
Up for sale is my JL Audio 300/2. Many of you may have noticed me spamming this thing recently. I've gotta get it sold, so I might as well give it a thread to bump.
Price:
$140 shipped OBO, but I think the price is fair (PAYPAL only)
Specs:
•150 watts rms x2 @ 1.5 - 4 ohms
•300 watts rms x1 @ 3 - 8 ohms bridged
•Dual N-Channel MOSFET power supply
•LED power indicators
•Absolute Symmetry™ Class A/B Circuit
•Differential-balanced with RCA jack inputs
•H-Bridge amplifier topology
•Pulse width modulation-regulated switching power supply
•2/1 operation
•Output Polarity Reversal Switch permits instant output polarity reversal
•Selectable as pass through, tracking LP or tracking HP Preamp RCA outputs
•Variable high-pass filter (50-200 Hz, selectable 12 or 24 dB/octave)
•Variable low-pass filter (50-200 Hz, selectable 12 or 24 dB/octave)
•Subsonic Filter (24 dB at 15 Hz)
•Frequency response: 5-30000 Hz
•Dimensions: 13.4"L x 9.25"W x 2.27"H
•4-gauge power and ground
Condition:
I'd say it's a solid 8.5-9/10
There's one .5" scratch at the top left of the heatsink that I was unable to buff out. There's a little wear at the bottom of the heatsink's facing as well, but it's nothing major & detracts very little from the amp's appearance. Any other imperfections are barely visable.
After receiving the amp I refinished the endcaps, heat fins and back plate. If you want a custom color that matches your vehicle, that would be easily achieved. It's all bolt on/off parts that can be painted any color you like. All of the pita sanding has already been taken care of too, so changing colors at this point would require little to no prep work.
Functionality:
Amp is tested and in fine working order. It's ready to throw at a pair of nice components.
Pics:
Feel free to PM questions...
SOLD!!!!!!!
Last edited by a moderator:
