jeep HU install help

[▼)Ñ╩fZΣµ& 10+ year member]

I have a 97 cherokee sport

this is what it would look like

how do i go about taking out the stock deck? i cant find anything on the internetz

Click to read more...

 

[hrtbrk1 5,000+ posts]

there should be screws underneath it...or just a pop off i think...yeah that whole center console cover should pop right off

 

[▼)Ñ╩fZΣµ& 10+ year member]

i was thinking the same thing, as it would just pop off, but when i put the flathead under it it feels as its about to break..

but i think that is the only thing in my way.. is the plastic outer piece.

in my car i have the different style trim it may be more brittle idk, but its a pos bhah

 

[blaze383]

Tug on the bottom and corners, make sure you have all the screws out, there on top in the middle and the bottom...then there should be 4 bolts that hold the stock unit in, it it like a 10mm or a 1/2 or 9/16 something idk....Jeeps **** I have had 3 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[hrtbrk1 5,000+ posts]

evanescence ftw!

 

[▼)Ñ╩fZΣµ& 10+ year member]

Tug on the bottom and corners, make sure you have all the screws out, there on top in the middle and the bottom...then there should be 4 bolts that hold the stock unit in, it it like a 10mm or a 1/2 or 9/16 something idk....Jeeps **** I have had 3 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

whoa there turbo

who just start tugging at the bottom of that plastic cover thing? and itl pop off then unscrew stuff??

or do i need to unscrew before i tug at it..

if so where the hell are the screws i cant find any..

i dont enjoy going outside when its 0º

 

[blaze383]

Of course you take the screws out first lol my bad....I had a GC not just a Cherokee.....it may just pop off it shouldn't be too hard to get off man.

 

[nineball 10+ year member]

i know on a 98 that the center cover just pops off. as stated start at the bottom. the radio is then held in by 2 10mm bolts.

google is your friend. use it. http://www.installdr.com/InstallDocs/Jeep/PDF/533001.pdf

 

[Toxic_Acoustiks 10+ year member]

http://documents.victorytechnologies.com//documents/product/813.pdf

 

[▼)Ñ╩fZΣµ& 10+ year member]

thankyou very much, //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[BeAlLsTaR13 10+ year member]

the front bezel pulls off then theres screws holding the HU in place

**my friend has a 2000 cherokee sport, same set up

 

[hrtbrk1 5,000+ posts]

told u it pulls off

 

[aebstract 10+ year member]

Your whole console from door to door should pop off.

 

[boogeyman 10+ year member]

did a jeep today.......no screws just give it a firm but gentle tug on the bottom and then the top, comes off easy and there will be 2 10mm bolts holding the deck in.probably the easiest cd player to remove out there.

 

[▼)Ñ╩fZΣµ& 10+ year member]

did a jeep today.......no screws just give it a firm but gentle tug on the bottom and then the top, comes off easy and there will be 2 10mm bolts holding the deck in.probably the easiest cd player to remove out there.

yep i just put my hands under the bottom of it and pulled a bit and tyhe entire thing popped off.. ha

2 bolts rewire then wire RCA/remote/ipod get the tight fitting radio bak in and wala

flawless victory