its still wet

[toolfan89 10+ year member]

how bout just going over it again with a thin coat of resin (this time with filler)will that help

 

[Megalomaniac 5,000+ posts]

I live in TX and my resin took less than 20min to fully cure //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif triple digit weather FTW

 

[lilmaniac2 5,000+ posts]

mix a really hot batch and put it on over it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Megalomaniac 5,000+ posts]

mix a really hot batch and put it on over it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

FYI don't do that, i did that on accident and it started smokin when applied,burnt through 3layers of mask tape,and faded the carpet

 

[lilmaniac2 5,000+ posts]

that was on masking tape.. this is on mdf //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Megalomaniac 5,000+ posts]

that was on masking tape.. this is on mdf //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

actually it was from bottom to top....Carpet....3layers of tape...a fiberglass shell already chopped matted and resined and cured..then the hot batch

 

[lilmaniac2 5,000+ posts]

all i can say is i have mixed numerous batches that were very hott and never had any problems with it burning

 

[Megalomaniac 5,000+ posts]

all i can say is i have mixed numerous batches that were very hott and never had any problems with it burning

this one time i was at my friends house we were working on his center console and it was cold outside the resin never cured we waited for 30min(you got to realaize we live in TX if it doesnt cure within 20min we get a bit aggitated) anyways we decided to put a hot batch to speed the process up.....the batch never made it to the car .....the hot batch cured by the time we reached the car,only a 10ft distance

edit:it wasnt cold outside i meant hot

 

[toolfan89 10+ year member]

what ya use to heat it up

 

[Megalomaniac 5,000+ posts]

what ya use to heat it up

//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif hardener

 

[toolfan89 10+ year member]

ah yeah it finally hardened i think it was just the weather here

 

[toolfan89 10+ year member]

i think i bought the wrong filler every time i see a pic of somebody using bondo its green and watery kinda but mine is grey an like playdough how do i judge the amound of drops i put it then?

 

[Megalomaniac 5,000+ posts]

i think i bought the wrong filler every time i see a pic of somebody using bondo its green and watery kinda but mine is grey an like playdough how do i judge the amound of drops i put it then?

the green one is not bondo its Rage Gold same thing different brand. actually rage gold is easier to sand it flakes of much better than bondo. i've heard Rage Extreme is even easier to sand

 

[toolfan89 10+ year member]

yeah i saw that at the store but i took the cheapest i found

 

[Megalomaniac 5,000+ posts]

yeah i saw that at the store but i took the cheapest i found

i always buy rage gold. the price is descent and the product is great. maybe next time i'll throw the cash to get the extreme stuff. but i bought my rage online for i think $25 for a gallon now compare that price to your local autozone $9 per quart of bondo you cant beat that:crazy: